Are There Torque Specifications For The e32GR Axle?
Updated 10/30/2025 | Published 10/04/2025
Question:
What are the lug nuts requirements for this axle?
asked by: Ken
0
Expert Reply:
Hey Ken,
This etrailer axle # e32GR uses 1/2" diameter lug nuts. For those size lug nuts and the 8-12" wheels that are used with this axle the recommended torque specification is 75-85 foot lbs.
What kind of trailer are you wanting to replace the axle on?
expert reply by:
Nick S
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: Replacement 2,000 Pound Axle With 5 on 4-1/2 Bolt Pattern For Bear Trailer
- Q&A: Can Trailer Spindle be Bent Back In Place
- Q&A: Recommended 2,000 lbs Axle w/ Idle Hubs That Have a 5 on 4-1/2 Bolt
- Q&A: Switching From ST185/80R13 Tires to ST205/75R14 Tires on Sun Tracker Boat Trailer
- Q&A: Powering 3rd Brake Light and Dome Light on Topper for 2025 Silverado 1500
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: How to Choose Replacement Axle for Lowe's 5x8 Trailer
- Q&A: How Are Brake Flanges Measured?
- Article: How to Determine Tire/Wheel Diameter
- Article: Rust Prevention
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure for Trailer Hitch Drop
- Article: 7 Common Questions Everyone Has About Trailer Tires
Nick S.
10/30/2025
Hey Ken, how did things go with the 1/2-inch lug nuts on your trailer axle? Did the torque range of 75–85 ft-lbs work well for your setup? Your update could make it easier for others replacing a similar axle.