What Size Drop Hitch For Lifted F250 Truck With Dump Trailer That Sits Too Low - 2" Receiver
Published 10/01/2025 >
Products Featured in This Question
Question:
My lifted F-250 sits high and I worry about getting my dump trailer level. Would I be better off with the 6inch drop or the 8inch drop version of this hitch?
asked by: Renee
Expert Reply:
Renee, since your truck sits taller, the # WS59WR with 8 inch drop is likely the better choice. Level towing is critical for braking and stability, and the extra gives you that adjustment margin. Both the 6 inch # WS82ER and 8 inch # WS59WR models are rated for 15,000 lbs GTW and 1,500 lbs tongue weight on a 2inch shank, so strength isn’t a concern.
The decision really comes down to ride height. While the 8 inch should suffice, I’d measure from the ground to the top of your hitch receiver and compare it with your trailer’s coupler height when level - that’ll confirm which drop keeps you towing level.
Want me to walk you through that quick measuring process? I've attached a photo which should help, but let me know if you need more assistance on that.
Product Page this Question was Asked From
Weigh Safe Pintle Hitch w/ Built-In Scale w/ Balls for 2" Hitch - 8" Drop - 15K - Steel
- Pintle Hitch
- Pintle Hook - Ball Combo
- Adjustable Height
- 15000 lbs GTW
- 2 Inch Hitch Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Standard Shank
- Weigh Safe
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Weigh Safe Pintle Hitch w/ Built-In Scale w/ Balls for 2" Hitch - 6" Drop - 15K - Steel
- Shop: Weigh Safe Pintle Hitch w/ Built-In Scale w/ Balls for 2" Hitch - 8" Drop - 15K - Steel
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Will Weigh Safe TW Scale Drop Hitch With Pintle And Balls Work In Rise Position?
- Article: Steel vs. Aluminum Ball Mounts
- Q&A: Recommended Trailer Hitch for Lance 2185 Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How Far Down is the Crosstube from the Truck Frame on Hitch 15445 on a 2002 Ford F-550
- Q&A: Dimensions For The Draw-Tite Receiver # DT45516 on 1999 Ford F-350 Cab and Chassis
- Q&A: Recommended Hitch for a 2001 Ford F-450 Cab and Chassis
- Q&A: Drop From Mounting Brackets to Hitch Opening Curt Hitch # C15845
- Q&A: Class V Trailer Hitch that can Fit Army Truck with 34 inch Wide Frame Rails
- Article: Determining Trailer Tongue Weight
- Article: What Do I Need To Tow A Trailer?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Measure Your Trailer Wheel Bolt Pattern


