Stabilizer Jacks for a 2025 FR Aurora 15rdx
Updated 10/22/2025 | Published 09/17/2025 >
Products Featured in This Question
Question:
Need help. I own a 2025 FR Aurora 15rdx and wpuld like to add stabilizers on the front. Looking at these. etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24 Lift - 5,000 lbs - Qty 2 e56VV. Do I need a mounting bracket to attach these to trailer? I am not seeing a place to attach them that looks like this, and it appears the back stablizers have another part that these attach to. Thanks.
asked by: Rebecca C
Expert Reply:
Great question, Rebecca!
The etrailer scissor stabilizer jacks, part # e56VV, is designed to bolt directly onto the frame of the trailer. There are several holes on the mounting bracket to help make it as close to universal as possible. It's also very possible that the trailer manufacturer added an additional plate for mounting.
If you can get the dimensions of your current brackets, I can check to see if this jack will work or if a different one will work better for you.
Product Page this Question was Asked From
etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 5,000 lbs - Qty 2
- Camper Jacks
- 5th Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Scissor Jacks
- Steel
- 4001 - 5000 lbs
- Drill-Powered Jack
- Manual Jack
- 24 Inch Lift
- Bolt-On
- 2 Jacks
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Video: Detailed Breakdown of the Blue Ox TrackPro Weight Distribution Shank for 2-1/2" Hitches
- Shop: Roadmaster High Low Adapter for Tow Bars - 2-1/2" Hitches - 4" Rise/Drop - 10K GTW
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 14" Long - 11 Hole Adjustment
- Shop: Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
- Shop: Roadmaster Dual Hitch Receiver Adapter - 2" Hitch - 4" Drop or Rise - 10,000 lb
- Shop: Blue Ox TrackPro Weight Distribution Shank for 2" Hitches - 7 Hole Adjustment
- Shop: Blue Ox TrackPro Weight Distribution Shank for 2-1/2" Hitches - 9 Hole Adjustment
- Shop: etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 5,000 lbs - Qty 2
- Video: Review of etrailer Camper Jacks - Scissor Stabilizer Jack Qty 2 - e56VV
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: weight distribution hitch
- Shop: Brake Controller
- Search Results: tow bar
- Shop: Base Plate for Tow Bar
- Search Results: anti~sway bars
- Shop: Vehicle Tow Bar Wiring
- Search Results: vehicle tow bar wiring
- Shop: Vehicle Tow Bar Brake System
- Shop: Vehicle Sway Bars
- Q&A: Recommended Stabilizer Jacks for a Rpod Trailer
- Q&A: Schematic Drawing of etrailer Scissor Stabilizer Jacks
- Q&A: Recommended Scissor Stabilizer Jacks w/a 2,500 lbs Capacity Per Jack and a 24" Lift
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Q&A: Looking for Spare Key for Curt Coupler Lock
- Q&A: What is Torque Spec for Castle Nut of Dexter 3,500 lb Axle
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements




Gwendolyn Y.
10/22/2025
Hey Rebecca, were you able to measure the brackets on your Aurora to see if the scissor stabilizer jacks line up with the frame? Once you had those dimensions, did the fit look right for mounting up front? Your update could make it easier for others adding stabilizers to a similar trailer.