Looking For Replacement For Tie Down Caliper Part LTD-46304
Updated 09/29/2025 | Published 09/06/2025
Products Featured in This Question
Question:
I have a boat trailer with two Tie Down brake calipers Part LTD-46304 with worn out brass bushings for the slide pins. Do you guys offer either replacement bushings for even a cross reference for different calipers? Any information would be appreciated.
asked by: Craig H
Expert Reply:
Hello Craig, thanks for reaching out. We do not carry replacement bushings for the TDE LTD-46304 caliper, but we do offer a suitable replacement for the caliper. For that you can use the following:
- Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs # KDBC225DAC
We have confirmed on multiple occasions that this is a compatible replacement for the TDE calipers.
(click to enlarge)
Product Page this Question was Asked From
Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Caliper Parts
- Rebuild Kit
- Kodiak
more information >
Continue Researching
- Search Results: caliper rebuild kit
- Q&A: What Brake Kit is the Best Replacement for My Tie-Down Engineering Caliper 46304 on Vortex Hubs?
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Video: Kodiak Disc Brake Caliper Review
- Shop: Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: Replacement Caliper for Dexter 10" Brakes - Passenger's Side
- Shop: Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Shop: Replacement Caliper for Dexter 10" Brakes - Driver's Side
- Q&A: Does Kodiak Caliper Rebuild Kit Only Work With Stainless Steel Calipers
- Video: The Low-Down on the Kodiak Disc Brake Caliper
- Search Results: dexter 46304
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Shop: Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Q&A: Can I Convert My Hub and Rotor on My Kodiak Disc Brakes to Idler Hub and Slip-On Rotor?
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Spring Towing Readiness Checklist
- Q&A: Is There a 90 Degree Adapter for the Kodiak Hydraulic Brake Hose
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Can Tang Washer Be Switched to Something Easier for 3,500 lb Axle
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Double-Eye Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
Jesse M.
9/29/2025
Hey Craig, did the Kodiak Disc Brake Caliper work out as a replacement for your Tie Down calipers? I'm curious to know how it performed, as it could help others looking for a similar solution.