Replacement Door Latches and Compartment Locks Keyed Alike

Question

Question:

I need to replace compartment locks x7 as well as compartment door latches assembly x2. How do I place an order for all of them to be keyed alike? Do they need to be all of the same brand and in the same cart? Thanks for your guidance.

asked by: Anthony

0

Expert Reply:

Hey Anthony. You'll definitely need to stick to the same brand. If you look below the price on the Replacement Cam Lock for RVs - Chrome Finish item # BA56FR, you were looking at, you'll see a drop down tab that says Keyed Unique. Click on that and select Keyed Alike before you add them to your cart.

For compatible compartment door latch assemblies you'll need the Bauer Products RV Baggage Door Slam Latch - Black item # BA57FR. You'll go through the same process with selecting Keyed Alike.

Please note, you have to purchase them all at the same time.

What kind of trailer do you have?

expert reply by: Jerred H

0

Anthony

10/12/2025

We have a 2019 Jayco Eagle HT 28.5 RSTS. I'll measure all my door thicknesses to make sure I order the right cam locks. Thanks for the guidance.

Jerred H.

10/12/2025

@Anthony You're welcome!

Answer 1

Hey Mike! The Power Mountain Tallboy Off-Road Bottle Jack #PM34FR can be stored in that manner (with the oil plug facing up), but my contact at Power Mountain stressed that it should only be done for a short period of time, so I recommend setting it…

view full answer...

Answer 2

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 3

Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…

view full answer...

Answer 4

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 5

Hey Mark, the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR that you referenced will work for you. This has a 6 ton/12,000 lb weight capacity and while your 5th wheel weighs more than that if loaded to the max the jack wouldn't be lifting…

view full answer...

Answer 6

Hey Todd! At the lowest setting, the saddle of the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR sits at 14" and the top of the saddle arms are at 15-3/8". I took a photo of it out in our warehouse, and while I wasn't able to get…

view full answer...

Answer 7

Hi Jean, thanks for reaching out. The locking cylinder part #A522VP is not available in a keyed alike set, so if you're looking to have all of your service body compartments and maintainer doors operate with a single key, that isn't an option…

view full answer...

Answer 8

The correct way to measure a lock cylinder for length is by the threads. The correct way to measure for width is by the two flat spots. Therefore, based on the photo you attached, you will need a 7/8" long lock cylinder like the Camco Cam Lock…

view full answer...

Answer 9

Hey Laura, Without knowing exactly what brand key you have originally I am not sure exactly what you have. I do know that the Bauer Products cam lock #BA56FR does have a key alike feature though. Meaning you can order them all keyed the same so one…

view full answer...

Answer 10

Hey Richard. The EcoHitch Hidden Front Hitch item #EH79CR will definitely support a 542 lbs motorcycle. It has a 1,000 lbs total capacity no matter how you use it. Unless you have the lightest motorcycle carrier ever, it's not going to work with…

view full answer...

Answer 11

The current version of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4060K does have a switch that allows you to switch to lithium batteries. But this switch didn't get incorporated until 2020. From the picture…

view full answer...

Answer 12

The thickness of the Camco Cam Locks is measured from the bottom of the threads to the cam. I attached a diagram showing where we measure the thickness for your reference. Based on the photo of your Cam Lock, the Camco Cam Lock #CAM44323 will replace…

view full answer...

Replacement Door Latches and Compartment Locks Keyed Alike

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching