Which InfiniteRule Trailer Latch Lock Has Closest to 2.5 inch Span

Question

Question:

I need an InfiniteRule Trailer Latch Lock for Dexter with Inside pin length span: 2.5 inches. Which do I choose?

asked by: Michael B

0

Expert Reply:

Hey Michael, the InfiniteRule trailer tongue lock we offer that is the closest to 2.5 inches of span like you asked about would be the part # IR92FR that you referenced which has a span of 2-5/8 inches. This would be just 1/8 longer than needed so that's still a pretty tight fit. Would that work for you?

expert reply by: Jameson C

0

Jameson C.

9/12/2025

Hey Michael, did the InfiniteRule trailer tongue lock with the 2-5/8 inch span work out for your needs? I'm asking because your experience could help others looking for a similar fit.

Answer 1

Hey John! We do have a lock for your Demco Channel Tongue Trailer Coupler #DM15945. Since this is a stamped 2" coupler you can use the InfiniteRule Trailer Latch Lock for Stamped Demco eZ-Latch Trailer Coupler #IR92FR. This is the best option,…

view full answer...

Answer 2

Hey John, thanks for reaching out. You will want to use some 1/2" grade 5 bolts and locknuts for mounting the Demco Channel Tongue Trailer Coupler #DM15945. Since the current coupler uses only 2 bolts, you will be fine to use two bolts with the…

view full answer...

Answer 3

Hey Kolin, that part number BC21014 is actually the part number for a Demco coupler decal and not for an actual ball mount. If what you have looks just like the part #DM15945 I would say it's a pretty safe choice for a replacement. Otherwise if…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Ted, thanks for reaching out. I went out to our warehouse and measured the Dexter Light Box Guard #DX99VC. The oval cutout is indeed 6-1/2" long x 2-1/2" tall. The 2" side light is supposed to be just a clearance light for…

view full answer...

Answer 6

Hey Jerry, thanks for reaching out. Sure thing! We do have kayak trailer options that will work really well for carrying your two NuCanoe U10s. We have options with extra-long crossbars which will work great for accommodating those 41" wide…

view full answer...

Answer 7

Indirectly yes, the part #T0778500 does get used with brake hoses. If you check out the attached picture you'll see that holds a union tee that hoses run to. We do have clamps that were designed to secure brake lines like with the part #A0500 for…

view full answer...

Answer 8

The bolt holes on the Demco coupler #DM15945 are 3" apart on center. I have included a drawing below that shows the dimensions. You can use a 1/2" grade 5 or higher bolt to attach to the tongue of your trailer.

view full answer...

Answer 9

Hey Robert, we actually have a lock that was made for locking A-60 couplers like the part #T4845000 that you referenced with the InfiniteRule part #IR82FR. This is a pin lock that fits through the hole just behind the coupler portion that attaches to…

view full answer...

Answer 10

Hey Tyler, you’ve got a couple ways to approach that depending on how often you’re off-grid. If most of your time is still campgrounds, the AR3 Essential #GB39FR will cover your day-to-day really well. Then for occasional off-grid trips, some folks…

view full answer...

Which InfiniteRule Trailer Latch Lock Has Closest to 2.5 inch Span

Product Page this Question was Asked From

Continue Researching