Do You Have a 2,000 lbs Axle w/ a 73" Hub Face?
Updated 08/07/2025 | Published 07/15/2025
Products Featured in This Question
Question:
Hey There, Bought a project trailer thinking the axle was good. Nope. Under side is rusted and split. I need a replacement: Heres the specs Im looking for: 2000lb straight trailer axle beam 1-3/4 Tube already have hubs, bearing, springs, etc 1-1/16 Inner Bearing and outer bearing are the same. Straight. No taper Hub Face is 73 Spring Center is 62 Having trouble finding anything at that Hub face and Spring Center. Not a welder so spring center needs to be welded. Do you offer anything that would work? Thanks
asked by: Jake A
Expert Reply:
Hey Jake, thanks for the information. The closest axle I have to those dimensions is the Trailer Idler Axle Beam item # e78GR. This is a 2,000 lbs capacity axle with a 72" hub face. It's got a straight spindle which uses item # L44649 inner and outer bearings. The spring seats are mounted at 58" on center so you'll need to find a welder to install two of the item # TRSS175 at 62" for you.
What's your project trailer going to be used for?
(click to enlarge)
Product Page this Question was Asked From
Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Proper Spacing Between the Hub Face and Spring Center Locations for 7,000-lb Triple Axles
- Q&A: Should There Be Any Play In Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Q&A: Wiring Instructions for the Tradesman Vaquero Hydraulic A-Frame Trailer Jack
- Q&A: Is There a Replacement Spindle For a Dexter D44, 4400LB Trailer Axle?
- Article: Most Popular Wheel Bearings
- Q&A: Do You Have the Instructions and User Manual for the Advent Air Low Profile RV Air Conditioner?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Solution for 1978 Prowler Travel Trailer with Bad Trailer Magnets
- Q&A: Do You Have Hubs and Brakes Compatible with Dayton Fayette 9349 Axles from 1979 Travel Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
Jerred H.
8/7/2025
Hey Jake, how's the search going for your trailer axle? Did you manage to find a welder to help with the spring seats? I'm curious to know how everything turned out, as it could really help others in a similar situation!