How Much does the 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles Weigh?

Question

Question:

How much does the spring weigh?

asked by: Wolfgang H

0

Expert Reply:

Hello Wolfgang,

The 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long # EM29AJ weighs right around 9 pounds, the weight is listed as 9.104 lbs.

What kind of trailer are you putting this on?

expert reply by: Kate F

0

Kate F.

8/7/2025

Hey Wolfgang, how did the spring work out for your trailer? I'm curious because it might help others with similar needs.

Answer 1

We can help you with replacement double-eye trailer leaf springs. Do note that you always want to replace leaf springs in pairs. This is because a new spring will have a slightly different length (it will be a little shorter) than the old one; this…

view full answer...

Answer 2

The Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs #AKEBRK-35 has a mounting pattern that is typical for 3,500 lb axles. The center on center horizontal measurement of the mounting bolts are 2-7/8 inches and…

view full answer...

Answer 3

Based on my research, it looks like the 8-247 hub assemblies on your trailer refer to a Dexter 3,500 pound hub and drum like #84546UC3-EZ. These hubs feature a 10 inch drum diameter and are 2-1/4 inches wide. With this in mind, the Dexter…

view full answer...

Answer 4

The only advantage you might get from using the 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long #e46SR instead of a handful stacked together, like the 5-Leaf #e34SR, is if you're needing to lower the height of your…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

Hey JT! Sorry to hear about your trouble with the leaf springs. Hopefully there wasn't a lot of damage and everyone stayed safe. From what I have found the 26E-3500 is the same as the Dexter 072-027-00. This is the 6-Leaf Double-Eye Spring for…

view full answer...

Answer 12

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

How Much does the 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles Weigh?

Continue Researching