Recommended Electric Brake Assemblies for 8-247 Dexter Hub and Drum Assembly
Updated 06/01/2018 | Published 05/30/2018
Products Featured in This Question
Question:
I have a custom made trailer with electric brakes. Numbers on hub 8-247 which is the hub ? Other number is MTA 9 guessing brake assembly. Looking for brake assembly
asked by: Charles L
Helpful Expert Reply:
Based on my research, it looks like the 8-247 hub assemblies on your trailer refer to a Dexter 3,500 pound hub and drum like # 84546UC3-EZ. These hubs feature a 10 inch drum diameter and are 2-1/4 inches wide.
With this in mind, the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 that you were looking at will fit these drums and work great. These are 10 inch x 2-1/4 inch electric brake assemblies that will automatically adjust for optimum performance and braking power. Both the left side right side assemblies are included. You will just want to make sure that its 4 bolt mounting pattern matches that of the mounting flange on your axle.
I have attached a short video demonstration on this brake kit that you can also check out.
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 8~247
- Search Results: 8~388~80
- Shop: Trailer Hub & Drum Assembly - 6,000 lbs Axles - 6 on 5-1/2 - Nev-R-Lube
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Wiring
- Search Results: tekonsha 90160
- Search Results: f2097
- Shop: Trailer Hitch
- Q&A: How Much does the 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles Weigh?
- Shop: Suspension Enhancement
- Video: Review of EMCO Trailer Leaf Springs - 1 Leaf Double Eye Spring 6000 lbs Trailer Axle - EM29AJ
- Search Results: brake flange
- Search Results: 8 247 drum
- Search Results: 1 leaf trailer leaf springs
- Video: All You Need to Know About the Brake Mounting Flange for 1-3/4" Round Trailer Axles
- Video: Review of TruRyde Trailer Spindles - Standard 84 Spindle - TRU84FR
- Q&A: Mounting Bolt Pattern of 10 Inch Electric Drum Brake Assemblies
- Q&A: Is There Any Advantage In Using a Single Leaf Spring Instead of a Stacked Leaf Spring
- Video: Dexter Nev-R-Adjust Electric Trailer Brakes Review
- Video: An In-Depth Look at the 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Video: Installing the Curt Trailer Hitch Receiver on a 2025 Toyota RAV4
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
on Trailer Hubs and Drums
