Availability of Trailer Axles without Spring Seats
Updated 08/07/2025 | Published 07/02/2025
Question:
Im seeing if you guys can get me a Dexter axle or similar this size 7k 93x76 4 , BEAM ONLY if not is it possible to get a 94 with loose spring seats? that way I can adjust myself?
asked by: Meshach O
Expert Reply:
Hey Meshach, I wish we sold axles without spring seats but at this time we only have a select few options and they all have spring seats welded on like the part # e85SR that you referenced. Your options are to find a local trailer shop to you who can order in axles to get the configuration you are looking for or to go with this axle and have the spring seats cut off and rewelded.
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - 4" Drop - 8 on 6-1/2 Bolt Pattern - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 7000 lbs
- 8 on 6-1/2 Inch
- 78-1/4 Inch Spring Center
- 94 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: Hub and Drum Assembly with 8 on 6-1/2 Bolt Pattern for Dexter 10,000 Pound Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Q&A: How to Determine Square and Round Tube Axle Capacity
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: Replacement Hub/Drum and Brake Assembly for 2014 Grand Design Solitude 369RL
- Q&A: Bolt Pattern For Hubs on 7,000 lb, 94 Inch Long Axle
- Q&A: Solution for Replacement Axle on 2010 SnoPro Snowmobile Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Where to Position the Trailer Axle?
Jameson C.
8/7/2025
Hey Meshach, did you manage to find a local trailer shop to get the axle configuration you were looking for, or did you decide to modify the axle by cutting off and rewelding the spring seats? I'm curious to know how it worked out for you, as it could help others in a similar situation!