Recommended Reverse Lockout Solenoid for Dexter Actuator

Question

Question:

Reverse Lockout Solenoid for Dexter and Tie Down Hydraulic Brake Actuators Part Number: DX46UR. I talked to Dexter this morning, they said to get P/N: 34500 for the solenoid, has two wires, power and ground. Is the DX46UR the same thing or can they be used inter-changeable?

asked by: Jim K

0

Expert Reply:

Hey Jim, our Dexter part # DX46UR will work just as well. The part number you mentioned is from their recently acquired UFP brand but it performs same function. This solenoid grounds through itself though so you only have to run the one power wire.

expert reply by: Jameson C

0

Jameson C.

9/2/2025

Hey Jim, did the solenoid work well for your setup with just the one power wire? I'm asking to ensure others can confidently use this solution too.

Answer 1

We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit #TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described…

view full answer...

Answer 2

Hey Brian, the correct reverse lockout solenoid you need for your Dexter actuator would be the part #DX46UR. Did yours fail or are you wanting to add one?

view full answer...

Answer 3

If your trailer is equipped with a fold-away coupler hinge like #FHDPB330301 then you can still use a surge brake actuator like the excellent Zinc-Plated #099-175-20. The only thing you will want to add is a flexible brake line across the hinge like…

view full answer...

Answer 4

You're certainly not the first person to ask about the Atwood 85739 master cylinder but those replacement parts are simply no longer available which means your best option truly is to replace your actuator. I completely understand this isn't…

view full answer...

Answer 5

If you are wanting to replace the entire surge brake actuator on your Four Winns Horizon 190 boat trailer then I have exactly what you will need. I recommend using the Dexter Disc Brake Actuator part #099-175-20. This actuator works with 2"…

view full answer...

Answer 6

The Dexter DX7.5 #099-175-20 does not have a way to engage the lockout manually. If your electric lockout is failing, I would check for power going to the solenoid valve. If it has power but is not functioning correctly you can replace it using the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hi Tim, That's a great question! While Timbrens and SumoSprings are both suspension enhancements, they perform differently depending on how much weight you're towing/hauling and how often you're planning on towing/hauling. The only…

view full answer...

Recommended Reverse Lockout Solenoid for Dexter Actuator

Product Page this Question was Asked From

Continue Researching