Weight Distribution Hitch for 2024 Toyota Tundra Towing Magic Tilt Tandem Axle Trailer
Updated 09/12/2025 | Published 05/28/2025
Products Featured in This Question
Question:
I have an 27 boat and aluminum double axle magic tilt trailer with surge brakes. Boat and trailer weigh approx 9800 combined 8129 boat, 1595 trailer. I have installed aftermarket air bags but the 2024 Toyota Tundra I drive states to use max towing you need a weight dist hitch. The aluminum beams on my magictilt trailer are more than 6 tall. Can you suggest something that would work for my application? Thank You!
asked by: Chad B
Expert Reply:
Hey Chad! How tall is the tongue of your trailer? It looks like the frame is quite a bit taller than the actual trailer tongue from some of the pictures I looked at. This is important because you're going to need a pole tongue adapter like # EQ95-01-5950 to use a weight distribution hitch on your trailer. The Equal-i-zer system is the best option but will only fit trailer tongues up to 5" tall. There are adapter offerings from Reese and Blue Ox as well but they only go up to 6" tall.
In addition to the trailer tongue dimensions you will also need to know your tongue weight (TW). Tongue weight is typically 10-15% of the loaded trailer weight, plus anything in your truck bed behind the rear axle. Assuming the Equal-i-zer Weight Distribution System can be used with the adapter there are likely two options based on the weight of your setup which are as follows:
-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37120ET (TW range 800 lbs - 1,200 lbs)
-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37140ET (TW Range 1,000 lbs - 1,400 lbs)
Ideally you want your tongue weight to fall into the middle of the range of the system. If you aren't sure what your tongue weight is I recommend measuring with a scale like the # BTBRV27FR to be sure. Once you have your measurements you can reply below and I can either confirm this will work or we can try to find another solution.
(click to enlarge)
Product Page this Question was Asked From
Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Pole Tongue Adapters
- Equal-i-zer
- Equal-i-zer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Big Truck Big RV Tongue Weight Scale for Trailers with SnapPad Jack Stand Pad - 2,000 lbs
- Q&A: Weight Distribution Hitch For Boat Trailer With Pole Tongue
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Weight and Sway Distribution Hitch For 2013 Camplite Trailer And Aluminum Frame
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended Equal-I-zer Weight Distribution Hitch for Ice Castle Fish House Trailer
- Q&A: Recommended Pole-Tongue Adapter for Curt TruTrack Weight Distribution System
- Q&A: Installing Equal-i-zer Weight Distribution System on Boat Trailer with Straight Tongue
- Q&A: Recommended Sway Control for Towable Ice Fishing House
- Q&A: What Info is Needed to Pick Out Replacement Disc Brake Parts for 2007 EZ Loader Boat Trailer
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
Robin H.
9/12/2025
Hey Chad, did you get a chance to measure the tongue height and weight of your trailer? I'm eager to see if the Equal-i-zer system or another option worked for your setup. Your experience could really help others with similar towing needs!