Best Replacement Hub for a TRU-RYDE RVD-H-655 Hub
Updated 09/29/2025 | Published 05/14/2025
Question:
I have TRU-RYDE. RVD-H-655 sz140529 on my trailer axles. Can you recommend a replacement.
asked by: Taig
Helpful Expert Reply:
I sure can and thanks for the information! To replace your TRU-RYDE RVD-H-655 hub, I recommend the Easy Grease Trailer Hub and Drum Assembly item # AKHD-655-6-K. This pre-greased hub comes ready to install on your trailer. It has a 6 on 5-1/2 bolt pattern and is designed for 5,200 lbs and 6,000 lbs axles. It is sold individually.
If you have any additional questions, go ahead and throw them into the comment box below and I'll be happy to answer them.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Brake Assemblies for 4.4k Axle with Assemblies Marked 5.2k
- Q&A: Replacement Electric Trailer Brake Assembly for Axletek Hub BD-655
- Article: Most Popular Wheel Bearings
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Q&A: Replacement Bearings for Dexter 5,200 lb Axles
- Q&A: Looking For Replacement For Hub Seal Victor 47445
- Q&A: Replacement Hubs and Brakes for Axle Tecknology BD2-655 Drums
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can I Run Velit 12V Air Conditioner In My Camper Van While Driving?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
Jerred H.
9/29/2025
Hey, did the Easy Grease Trailer Hub and Drum Assembly work out for your trailer? I'd like to hear your outcome because it could give others confidence when ordering replacements.