How to Find Replacement Brakes for 2001 Magnum Tandem Axle Boat Trailer
Updated 09/29/2025 | Published 05/13/2025
Products Featured in This Question
Question:
Good morning, I have a 2001 Magnum dual axle boat trailer that I would like to replace the brakes on. The trailer VIN:1v5aa232411345670 has 14 in wheels with a 5 lug pattern. Based on this information, can you recommend a brake replacement? Thank you, Bryan West
asked by: Bryan W
Expert Reply:
Hey Bryan! To find replacement brakes we need to either identify your axle or at least know the size and the brake flange bolt pattern. The best way to identify the axle is with the axle tag. Are these electric brakes or hydraulic? If I had to guess, you probably have 3,500 lb axles on the trailer.
If they're standard axles you can use the # AKEBRK-35-SA for electric brakes or # AKUBRK-35 for hydraulic. If you need free backing because you don't have a lockout that would be # AKFBBRK-35. All of these are 10" x 2-1/4" brake assemblies that fit a 4-bolt brake flange with holes 2-7/8" apart on center.
If you find that you have a different axle, or a non-standard brake flange, let me know in the comments below and I'll see what else is available.
(click to enlarge)
Product Page this Question was Asked From
etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake lines
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Video: Breaking Down the Hydraulic Trailer Brake Kit
- Search Results: 5 pin trailer wiring
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Search Results: demco brake actuator
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 15'
- Shop: Kodiak Hydraulic Brake Line Kit - Tandem Axle - 15'
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Roof Rack
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Search Results: atwood 85736 master cylinder
- Search Results: demco hydraulic trailer brake actuator
- Video: Ultimate Overview of the Mounting Hardware for 10" Brake Assemblies
- Video: Review of Titan Brake Actuator - T4820000
- Q&A: Replacement Actuator for an Older Atwood 85736
- Q&A: Replacement for Atwood 6,000 lb Hydraulic Actuating Coupler for Drum Brakes
- Q&A: Is There Manual Lockout Available for Demco Surge Actuator part # DM72VR
- Q&A: Can the Replacement Atwood Master Cylinder 85736 Still Be Obtained
- Q&A: Replacement Surge Brake Actuator For Atwood 85736 That Is Discontinued
- Q&A: Brake Solenoid for 85738 Atwood Surge Trailer Brake - Replace With
- Q&A: Replacement Brake Actuating Coupler for Discontinued Atwood Coupler
Robin H.
9/29/2025
Hey Bryan, did you have a chance to check the axle tag or the brake flange bolt pattern on your trailer? I want to make sure we find the right brake replacement for you. If you're still looking for a solution, I'm happy to help!