What are Interior Dimensions of Snap-Top Battery Box with Strap for Group 24 to Group 31 Batteries

Question

Question:

What are the interior dimensions of the box? Looking to confirm whether it will fit a 12.99L x 6.81W x 8.35H battery I am trying to find a box for.

asked by: Brian F

0

Expert Reply:

Hey Brian, the interior dimensions of the NOCO battery box part # 329-HM318BKS that you referenced are 14-5/8" long x 8" tall x 7" wide.

expert reply by: Jameson C

0

Jameson C.

9/26/2025

Hey Brian, did the NOCO battery box work out for your battery? I'd love to know if it was the right fit, as it could help others looking for a similar solution.

Answer 1

Hey Ron, congrats on the new SUV. To add a hitch and a wiring harness to your 2026 Toyota RAV4 Hybrid, I recommend the Curt Hitch item #C34FR62ZY and the Curt Trailer Wiring Harness item #C34FR62FT. The Curt Hitch item #C34FR62ZY is custom fit for…

view full answer...

Answer 2

Hello William, thanks for reaching out. I can certainly assist you in upgrading your tires and wheels, but I do not have a way to know what bolt pattern your trailer currently uses. The 5 on 4-1/2" pattern is very common, so this is likely what…

view full answer...

Answer 3

Hi James, We installed the Curt Trailer Hitch Receiver part #C94WR on a 2026 Hyundai Tucson and in the video, they take some measurements of the hitch on the vehicle. It looks like from the ground to the top of the inside of the hitch measures about…

view full answer...

Answer 4

Hey Jim, thanks for reaching out. Since you already have E-track in the trailer, I’d keep this pretty simple. Here is what I recommend: - Z-TRAK O-Ring Tie-Down Anchors for E-Track Systems - Qty 4 #ZT84VR - etrailer Ratchet Strap w/ Snap Hooks -…

view full answer...

Answer 5

Hey Gabe! For a hitch I recommend Curt #C94WR. This hitch fits all models of the 2026 Tucson, including your Limited Hybrid. The receiver sits right up under the bumper with the cross tube completely hidden. See the attached photo. What will you be…

view full answer...

Answer 6

Happy to help James, There are several ways to mount the TorkLift PowerArmor Locking Battery Box #TLA7700L depending on your trailer. The box does not use a specific bolt pattern in the bottom. Instead, it is designed to be mounted a few different…

view full answer...

Answer 7

Hey Ed! I reached out to NOCO and they said the Commercial Grade Battery Box for Group 4D Batteries #329-HM408 will be able to fit inside. There is enough flex, it will just be incredibly tight. This also means you won't have to try to fit the…

view full answer...

Answer 8

Welcome back Phillip, and thanks for the information! I've got two ball mounts that are close to 12" from the hitch pin hole to the center of the hitch ball but I don't have one that is exactly 12". I have listed them below:…

view full answer...

Answer 9

Hi Tim, If you're wanting to upgrade after adding a 200Ah battery, the WFCO Auto Detect RV Converter AC/DC Distribution Panel - 40 Amp part #WF46FR would be a great upgrade from your current 35 Amp converter. I wouldn't recommend upgrading to…

view full answer...

Answer 10

We have an option that will work exactly how you are wanting. I recommend the Snap-Top Battery Box with Strap for Group 24 to Group 31 Batteries - Vented #329-HM318BKS which can be mounted to the tongue of your trailer and would be perfect for…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What are Interior Dimensions of Snap-Top Battery Box with Strap for Group 24 to Group 31 Batteries

Product Page this Question was Asked From

Continue Researching