Can Curt Weight Distribution be Used Behind a Class C RV?
Updated 10/22/2025 | Published 04/07/2025
Products Featured in This Question
Question:
I have a 40foot renegade Verona class c RV and tow a 34foot haulmark edge pro race trailer. i wanted to use this hitch to take the sway out of the trailer. I think my receiver is larger than my F250, will this work? Do i need a larger shank for the receiver? Is it ok to tow behind a Class C RV? Thanks
asked by: Eric A
Expert Reply:
Hey Eric, thanks for reaching out!
As long as the hitch on your Class C RV is rated for weight distribution, you can use the Curt Round Bar Weight Distribution System # C17063 with no issues.
When it comes to using it with the 2-1/2" receiver on your truck, you can technically use a reducer like the etrailer # e28JR, but best practice is to use a shank like the Curt # C17131 that's designed for a 2-1/2" hitch receiver, so I recommend going that route instead.
Where is your favorite spot to race at?
Product Page this Question was Asked From
Curt Round Bar Weight Distribution System w/ Friction Sway Control - 14K GTW, 1.4K TW
- Weight Distribution Hitch
- WD With Sway Control
- Round Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Requires Disconnection
- 1100 lbs
- 1200 lbs
- 1300 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: trailer hitch ball
- Search Results: weight distribution hitch
- Article: How to Measure for Trailer Hitch Drop
- Search Results: equal~i~zer weight distribution hitch
- Shop: Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Shop: Replacement Head for Curt MV Weight Distribution Systems
- Video: All About the Replacement Bolts for Equal-i-zer Weight Distribution Head
- Shop: Replacement Bolts for Equal-i-zer Weight Distribution Head - 6,000 lbs to 14,000 lbs GTW
- Shop: Shocker 2-5/16" Hitch Ball with 1-1/4" Shank- 20K
- Search Results: reese weight distribution hitch
- Video: Safer Smoother Towing: Inside Equal-i-zer Weight Distribution Hitches
- Search Results: hitch adapters
- Search Results: equalizer hitch head
- Search Results: equalizer shank
- Q&A: What Size Socket is Needed For 2-5/16 Inch Hitch Ball
- Q&A: Is There 2.5 inch Shank That Can be Used with Curt 20 TruTrack WD System
- Q&A: Can etrailer Magnetic Hitch Reducer be Used when Towing Travel Trailer
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Video: Review of the Replacement Head for Reese Weight Distribution System
- Q&A: Comparing Blue Ox and Equal-i-zer WDHs for 2018 Airstream International Signature 30RB
- Q&A: Recommendation on a Weight Distribution System for a 28 Foot Airstream Trailer and 2017 Ford F-250
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Video: Mount: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control on a 2019 Ford F-150
- Video: Customer Review - Equal-i-zer Weight Distribution System
- Q&A: Upgrading to 2-1/2 Inch Shank or Using a Reducer Sleeve with Equal-I-zer Weight Distribution System
- Q&A: Longest Weight Distribution Shank for a 2-1/2 Inch Hitch Receiver
- Video: Review of etrailer Hitch Anti-Rattle - Anti-Rattle - e38FV
- Video: In-Depth Review of the Equal-i-zer Weight Distribution Shank
Jon G.
10/22/2025
Hey Eric, how did things go using the Curt weight distribution system with your Renegade and race trailer? Did the setup help take out the sway like you were hoping? Your feedback could really help others towing similar rigs.