Which SumoSprings Kit Fits 2024 Toyota Tundra with 4 inch Lift

Question

Question:

Hello. I have a 4 inch lift on my 2024 tundra. Will the SumoSprings still work on my truck?

asked by: Kirk H

0

Expert Reply:

Hey Kirk, for the SumoSprings kit part # SS46PV that fits your 2024 Toyota Tundra you'd need to use the Timbren spacer blocks part # A25723-90AH00 to take up that extra space created by the lift. You'd need 4 of these per side as these are 1 inch spacers.

expert reply by: Jameson C

0

Jameson C.

10/22/2025

Hey Kirk, how did things go pairing the SumoSprings with the Timbren spacer blocks on your lifted Tundra? Your results could really help others working with similar lift setups.

Reply

Chris M.

10/25/2025

Is there a recommend spacer size for a 2022 Tundra with a 3" lift?

Reply

Jameson C.

10/27/2025

@ChrisM Since you have a 3 inch lift you'd need 3 of the spacers mentioned above for each side of the truck. So you'd need a total of 6.

Reply

Answer 1

That's a cool set up you have there, and the best option for suspension enhancement for your 2022 Toyota Tundra is going to be Timbrens to help support the added weight in the rear. The correct part number for your '22 Tundra is the…

view full answer...

Answer 2

Hello Tom, Congrats on the new 2025 heartland corterra 3.0 5th wheel, what is your favorite feature? I cannot find the exact weight anywhere for the Stackers StayPut Jack Pads and Leveling Blocks #VAL93MB. I do know that they will be able to handle…

view full answer...

Answer 3

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 4

Hey Mark, I recommend going with the kit you looked at, which is Timbren Suspension Enhancement System - Rear Axle #T45MR along with Spacer Kit #T68MR. If you had a camper on the bed, or had the rear end maxed out all the time, then I'd recommend…

view full answer...

Answer 5

The front axle Timbren kit part #TGMFK25D that you referenced does fit your 2019 Chevy Silverado 2500. The bolt size it comes with is M10 x 30 x 1.5 GR 8. This is 3/8 inch in diameter so for a 1 inch spacer you'd then need the part #A25723-90AH00…

view full answer...

Answer 6

Hello David, thanks for reaching out. Between the TImbrens and the SumoSprings for your 2024 Toyota Tundra I definitely recommend the Sumos. They have a progressive spring rate so you don't get as rough of a ride when you are unloaded. Since your…

view full answer...

Answer 7

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 8

Hello Peter, No, the Toyota 4Runner and the Land Cruiser do not use the same coils. We do have a great option that is maintenance free for your 2025 Toyota Land Cruiser, the SumoSprings Custom Helper Springs - Rear Axle #SS88FJ which has a 1,400…

view full answer...

Answer 9

In regards to the SumoSprings Trailer Helper Springs for Overslung Trailers, you could in all honesty use either the blue part #TSS-107-40 or black part #SS26MV. It's better to be under than over so I do recommend the black but either will work.…

view full answer...

Answer 10

First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…

view full answer...

Answer 11

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...