Will the etrailer Hitch # e87AR Get in the Way of My Hands Free Tailgate Kick Sensor?

Question

Question:

Does installing this hitch etrailer Class 3 Trailer Hitch - 2023 Mazda CX-9 on a Mazda CX-9 impact the usability of the kick sensor to open the trunk? I have read conflicting things online.

asked by: Zack

0

Expert Reply:

Hello Zack,

Great question, we get this question quite often about the hitches. With any aftermarket hitch there is the possibility of it covering the sensor the hands-free tailgate. The good news is that you will still be able to use the sensor, but you might have to move your foot to the side of the receiver to find that "sweet spot." I attached a video where my buddy Ryan did an install for the etrailer Trailer Hitch Receiver # e87AR on a 2021 Mazda CX-9, if you skip ahead to exactly 1 minute he will bring up the kick sensor and will show you how it still works.

What are you looking to use the hitch for?

expert reply by: Kate F

0

He kicks to the side of the receiver
(click to enlarge)

Hands-free tailgate works =)
(click to enlarge)

Answer 1

Hey Phil, you came to the right place, and I am happy to help. Firstly, as far as the trailer hitch for your 2020 Mazda CX-9, I recommend the etrailer Class 3 Hitch #e87AR. This has a 2" receiver which is very common. This means you will have a…

view full answer...

Answer 2

Hi Dominik! We do have 4 Class 3 hitches with 2" receivers available for your 2023 Mazda CX-9 Carbon, all of which are going to be pretty similar. I have all 4 listed below with their weight capacities: etrailer Trailer Hitch Receiver - Custom…

view full answer...

Answer 3

No, it doesn't but I have a less expensive one that does. For your 2023 Mazda CX-9 you will want the Draw-Tite Hitch item #76020. This hitch is custom fit and bolts to your Mazda with included hardware. I really like this hitch because it mounts…

view full answer...

Answer 4

The underbody panel you're referring to can be placed back on, but you'll have to trim it around the etrailer Trailer Hitch Receiver - Custom Fit #e87AR in order to get it to fit. It is a bit challenging with this vehicle so most people would…

view full answer...

Answer 5

Hey Jim, I am going to let you in on an little secret...so the etrailer hitches like the part #e87AR are basically the exact same as the Curt hitches as they are made by same company. Only difference is the powder coat is a matte finish as opposed to…

view full answer...

Answer 6

We have trailer wiring that fits your 2022 Mazda CX-9 with the Tekonsha kit part #118278 but the Curt you mentioned is not a fit for your vehicle. This will work great with the Draw Tite hitch you plan on installing on your vehicle as well #76020.

view full answer...

Answer 7

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56338 does not have a separate ground wire outside of the connector. You do not need to find an additional ground you will simply utilize the integrated ground in the…

view full answer...

Answer 8

Hi Jim; I'm not sure which video you watched originally but the one I linked below shows exactly how to pull back the rear trim panel and access the plug for the #C56338 you purchased. This is the bulk of the installation and the most important…

view full answer...

Answer 9

To get a 5 flat harness, like #20036, installed, you will definitely want to be careful while installing. You will need to use a tester, like the #PTW2993, to make sure you are connecting to the correct wire. Once the correct sire is found, splicing…

view full answer...

Answer 10

I believe the fuse referenced on your Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56338 is the fuse that goes into the fuse holder on the power (red) wire. I would check there first and see if the fuse has blown which…

view full answer...

Answer 11

Your 2021 Mazda CX-9 comes with a factory OEM tow package. Essentially all this is, is a plug in port that allows you to plug in the wiring harness instead of having to splice it into your wiring. Both the T-One Vehicle Wiring Harness for Factory Tow…

view full answer...

Answer 12

To install a 7-way on your 2022 Mazda CX-9 you would first need to start with a 4-way like the Curt #C56338 which is a custom fit kit that doesn't require splicing. If the 7-way only needs to support trailer lighting function (not brakes) then…

view full answer...

Will the etrailer Hitch # e87AR Get in the Way of My Hands Free Tailgate Kick Sensor?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching