Are the Bearings and Seal for the Dexter Trailer Idler Hub Dexter Brand
Updated 08/24/2017 | Published 08/23/2017
Question:
Hello, Are the bearings, race, and seal all genuine Dexter brand, or just the hub? Thank you.
asked by: Christopher S
1
Helpful Expert Reply:
The included bearings and seal with the Dexter Trailer Idler Hub Assembly, # 34822545BX, were included with the hub from Dexter. Therefore, the bearings and seal are Dexter approved parts.
Dexter does not manufacturer their bearings and seals for there hubs, but use the highest quality products from vendors with their products.
expert reply by:
Jared P
1
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Redline
more information >
Continue Researching
- Video: Feature Review Dexter Trailer Idler Hub Assembly for 2,000-lb Axles
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Q&A: Pregreased Idler Hub Assembly for 2000 lb EZ Lube Axles
- Q&A: Is It Safe To Add Marine Or Equipment Grease To The e82GR Idler Hubs?
- Q&A: Replacement Trailer Hub With 5-Bolt Wheel Lug Pattern
- Q&A: Troubleshooting Trailer Hub that Gets Warms
- Q&A: Double Lip Grease Seals to Replace Transcom Seal 12192TB
- Q&A: Trailer Grease Seal Recommendation for Replacement of Victor 47376
- Q&A: Replacement Spindle for Procraft Trailer
- Search Results: tail light
- Search Results: washer
- Search Results: 58846
- Search Results: trailer jack
- Search Results: led tail lights
- Search Results: stl9rb
- Search Results: grease
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: A-Frame Trailer Coupler - Thumb Latch - Black - 2-5/16" Ball - Weld On - 14,000 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Washer For 1" Spindle