Bearing, Race And Seal Info For Dexter 3,500 lb Axle
Updated 10/27/2025 | Published 03/04/2025
Products Featured in This Question
Question:
Im trying to find the bearing, race and seal numbers for a Dexter axle. The serial number is 133256231077.
asked by: Phillip W
0
Dexter Axle Tag
(click to enlarge)
(click to enlarge)
Expert Reply:
Hello Phillip, thanks for reaching out, and for the picture. Your Dexter axle uses the standard bearing sizing for a 3,500 lb axle. It uses the # L68149 inner bearing and # L44649 outer bearing. The seal is a 1.719" ID and 2.565" OD.
We offer all of this in a bearing kit, and for that you can use the following:
- Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle # BK2-100
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: 3500 lbs axle trailer brakes
- Search Results: bearing l44649 and l68149 trailer bearings races seals caps
- Search Results: trailer hubs and drums
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Video: Dexter Nev-R-Adjust Electric Trailer Brakes Feature Review
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Hub and Drum Assembly for 4,000-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Dexter Electric Trailer Brake for Dexter ABS Tow Assist - 10" - Left/Right Hand - 4.4K
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM8509612
- Q&A: Replacement Surge Brake Actuator For Drum Brakes On 6,000LB Boat Trailer w/ Atwood A-Frame Actuator
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Q&A: Replacement Axle Needed for 3,500 lb Square Tube Axle with 89" Hub Face
- Q&A: Recommended Surge Brake Actuator For Demco DT6000 Trailer With Drum Brakes
- Q&A: Can Surge Brakes be Added to 1996 Scamp Trailer that Weighs 2,000 lbs
- Q&A: Install Diagram For Manual Reverse Lockout Kit # DM5939
- Q&A: Determining Hanger Spacing for Replacement Leaf Springs on Trailer
- Video: Uni-Servo Wheel Cylinder for 10", 12" and 13" Dexter Brake Assemblies Spec Review
- Video: Let’s Check Out the Manual Reverse Lockout Kit for Demco Hydraulic Trailer Brake Actuators
- Video: In-Depth Review of the Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Shop: Trailer Wiring
- Video: What to Know About the Demco Hydraulic Brake Line Kit
- Shop: Trailer Hitch
- Q&A: Hanger Spacing Recommendation for a Tandem Axle Trailer with 25-1/8 inch Long Leaf Springs
- Search Results: trailer bearing washer
- Search Results: brake lines
- Search Results: 7way
Jesse M.
10/27/2025
Hey Phillip, how did things go with the bearing kit for your Dexter axle? Did the parts fit the way you needed? Your update could make it easier for the next person working on the same axle.