Replacement Axle Needed for 3,500 lb Square Tube Axle with 89" Hub Face
Updated 08/02/2022 | Published 08/01/2022
Products Featured in This Question
Question:
Looking for a 3500lb square tube axel with a 89 in hub face.
asked by: Alan J
Expert Reply:
The only square tube axles we have are for smaller boat trailers, but we may still have some compatible options depending on your trailer.
The Trailer Axle w/ Electric Brakes # e43SR has an 89" hub face length as well as a 74" leaf spring center length so if this matches the dimensions of your trailer then you just need the U-Bolt Kit # CE23002 to fit this to your trailer.
Another option is the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs # A35RS545E rated for 3,500 lbs. This replaces the standard leaf spring setup and uses individual AEON rubber springs that give your trailer better performance.
I'm attaching videos of both systems for you to check out.
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM8509612
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Q&A: Replacement Surge Brake Actuator For Drum Brakes On 6,000LB Boat Trailer w/ Atwood A-Frame Actuator
- Shop: Uni-Servo Wheel Cylinder for 10", 12" and 13" Dexter Brake Assemblies - Zinc - RH
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Boat Trailer Axle - 92" Long - Galvanized
- Shop: Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Video: Let’s Check Out the Manual Reverse Lockout Kit for Demco Hydraulic Trailer Brake Actuators
- Video: Uni-Servo Wheel Cylinder for 10", 12" and 13" Dexter Brake Assemblies Spec Review
- Q&A: Can Surge Brakes be Added to 1996 Scamp Trailer that Weighs 2,000 lbs
- Q&A: Install Diagram For Manual Reverse Lockout Kit # DM5939
- Q&A: Determining Hanger Spacing for Replacement Leaf Springs on Trailer
- Q&A: Recommended Surge Brake Actuator For Demco DT6000 Trailer With Drum Brakes
- Shop: Replacement Master Cylinder for Dexter Model 6 Drum Brake Actuators
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Demco Hydraulic Brake Actuator w Drop - Drum - Primed - A-Frame - 2" Bulldog Coupler - 8,000 lb
- Video: In-Depth Review of the Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Video: All About the Replacement Solenoid Cover for Demco Hydraulic Brake Actuator
- Video: Hands-On with the Replacement Shock Absorber for Toledo Brake Actuators
- Q&A: Bearing, Race And Seal Info For Dexter 3,500 lb Axle
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Search Results: master cylinder rebuild kit
- Search Results: 4000 lb axle
- Shop: Trailer Hitch