Does Reese 5th Wheel Base Rails/Outboard Bracket Kit # RP56011-53 Fit 2012 Ram 3500 Dually

Question

Question:

We have a 8foot bed in our 3500 dodge ram dully. Will these above rail brackets fit or are they too long?

asked by: Tracy

0

Expert Reply:

The Reese 5th Wheel Base Rails/Outboard Bracket Kit # RP56011 that you referenced are a confirmed fit for your 2012 Ram 3500 dually. This custom bracket kit will save you several hours of installation time as compared to universal install kits. The install instructions are linked for your reference.

expert reply by: Adam R

0

Answer 1

I checked out the install instructions for the Air Lift kit part #AL57297 that you have and it would easily fit with the Reese Outboard Rail Kit part #RP56011-53 that you referenced.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hi Glen, It's good to hear from you again! If you're wanting to switch to the Roadmaster Comfort Ride system with the leaf spring, equalizer, and shock absorber upgrades, I recommend using the Roadmaster Comfort Ride Leaf Spring Suspension…

view full answer...

Answer 11

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Answer 12

Hey Jordan! Based on your measurement you have a Lippert 1116 or 1716. If you want to confirm that feel free to send me the S/N on your pin box. The Gen-Y Nomad you were looking at is for the Rhino Box so that is not a fit. What you need is the Gen-Y…

view full answer...

Does Reese 5th Wheel Base Rails/Outboard Bracket Kit # RP56011-53 Fit 2012 Ram 3500 Dually

Continue Researching