Recommended Mounting Locations For A 2 Gallon Firestone Air Tank
Updated 10/30/2025 | Published 02/17/2025 >
Products Featured in This Question
Question:
Do you have a recommended location for the 2 gal tank on the F49VV. Ive got a slide in truck camper so inside the bed is not an option. I have a 2024 F350 4WD Single rear wheel Axle.
asked by: Dave S
Expert Reply:
Hi Dave,
Firestone has a no-drill mounting bracket # F2530 to mount the air tank from the # F49VV and it's pretty typically to just mount it to the outside of the passenger side frame rail right around where the cab and bed meet. If you have the space you could mount the tank to the hat channel under the bed. Jake made a video on his Ram doing this, which I've attached below, that you can use as a reference if this interests you.
Personally, I'd go with the hat channel mounting if you have the space to help protect the air tank and the lines running to it. Since you have an in-bed camper I'm assuming you might also off-road so mounting it to the outside of the frame rail could potentially leave it vulnerable to any rocks or brush that could kick up and hit it.
If you want to send in some pictures of your F-350's underbelly I could take a look and give some more specific recommendations.
Product Page this Question was Asked From
Firestone Air Command Extreme Duty Air Compressor with Tank - Smartphone App Only - Dual Path
- Air Bag Compressor Kit
- Smartphone App
- Dual Path
- Smartphone Display
- 2 Gallon Tank
- Extreme Duty
- Firestone
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Pacbrake Premium Air Tank and Accessories Kit - Black - 2-1/2 Gallon
- Shop: Pacbrake Air Bags w/ Jounces and On Board Air Compressor w/ 1/2 Gallon Tank - Wireless - 5,000 lbs
- Shop: Suspension Enhancement
- Video: Lock N Roll Adjustable Trailer Coupler 336TS515 Review
- Shop: Bulldog Winch On-Board Air Tank - 2 Gallon - (8) 1/4" NPT Ports, (2) 3/8" NPT Ports
- Shop: Sealed Pressure Switch for Bulldog Winch Air Tank - 165 to 200 psi
- Shop: Replacement Pin for Lock N Roll Vehicle-Side Trailer Hitch Latching Plates
- Shop: Bulldog Winch On-Board Air Tank - 2.5 Gallon - (8) 1/4" NPT Ports, (2) 3/8" NPT Ports
- Shop: Lock N Roll Articulating Hitch w/ 5-Position Channel - 2" Receivers - Vehicle Side - 11K
- Q&A: Will the Hellwig Big Wig Rear Anti-Sway Bar Work w/ Firestone Airbags on a 2024 GMC Sierra 3500?
- Q&A: Recommended Air Bags and Compressor w/ Bluetooth for a 2015 Ford F-350
- Q&A: Does the Firestone Air Command Extreme Duty Air Compressor w/ Tank F46VV Come w/ Mounting Brackets?
- Q&A: 2024 Ford F-350 Super Duty Air Bag Kit Recommendation for an In-Bed Camper
- Q&A: Does the DeeZee Truck Bed Mat DZ35GJ for a 2019 F-450 Show Where to Cut-Out for the Pucks?
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: Recommended 7,500LB Capacity Air Springs and Compressor For a 2016 Ford F-250
- Q&A: Recommended Hellwig Anti-Sway Bars for a 2024 Ram 3500 4x4
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Anti-Rattle Devices
- Article: Gooseneck Trailer Hitch Information and Review
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Trailer Wiring Diagrams
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?





Jameson C.
10/30/2025
Hey Dave, how did the hat channel mounting option work out for your F-350 and the Firestone air tank? Your setup could really help others with slide-in campers looking for a good mounting spot. Sharing what you found might guide others with similar trucks.