Can Air Lift Compressor System AL77DQ Be Used For An Air Horn?

Updated 09/12/2025 | Published 05/21/2025

Products Featured in This Question

Air Lift WirelessONE Suspension System for Air Helper Springs - Remote - Bluetooth - EZ Mount

(633)

$1195.90

Air Lift WirelessAIR Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount

(416)

$670.83

Question:

I have a 2022 f 350 with the airlifted 5000 air bags In place. I am wanting to add a compressor unit compressor unit with an air tank. I also want to add an air horn. Which kit do you recommend to be able to accomplished this setup? Thank you Brad

asked by: Brad W

Expert Reply:

Hello Brad, thanks for reaching out. For a compressor system to go with your Air Lift LoadLifter 5000 air bags I recommend the following:

- Air Lift WirelessONE Suspension System for Air Helper Springs - Remote - Bluetooth - EZ Mount # AL77DQ

This will allow you to monitor and fill the bags using your smartphone or the included remote. It comes with an air tank and fill hose. It also comes with the easy mount brackets which makes installing the compressor a breeze.

As far as the air horn, you won't be needing the compressor constantly for the air bags and air tank so an air horn shouldn't give you any negative issues with the air springs. That said, I don't know the requirements of the air horn so you'd need to look into what kind of air tank it would need to function and at how it connects to an air line/tank so we can figure out what kind of adapter you'll need to connect to the compressor system. Depending on the connection type you could tee into the air line somewhere to add in the air horn or just install a manifold and have all your lines run out from it to the springs and horn.

I hope this helps. Hit the reply button below and let me know if there is anything else I can do to help.

expert reply by: Jesse M

Air Lift WirelessONE Suspension System for Air Helper Springs - Remote - Bluetooth - EZ Mount
(click to enlarge)

Jesse M.

9/12/2025

Hey Brad, did you have a chance to look into the air horn requirements and how it connects to the air line or tank? I'm here to help if you need further assistance with setting up your system.