Will The RoadActive Suspension System Fit A 2023 Ford F-350 DRW

Question

Question:

will this fit a 2023 F350 DRW?

asked by: Tony

0

Expert Reply:

Hey Tony,

Yes, the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3611-SLHD is a confirmed fit for a 2023 Ford F-350 DRW. If your model has factory top overload springs you will have to remove them in order to install the RAS system. These have a 3,000lb load-leveling capacity and the best part about them is that they're designed to only activate when weight is added to the suspension so they won't hurt you unloaded ride quality.

Are you hauling varying loads or just your camper around?

expert reply by: Kevin C

0

Tony

1/10/2025

16000 lb 5th wheel

Kevin C.

1/10/2025

@Tony This would be a perfect option then since you're not going to be constantly hauling something around. Like I was saying above these only active as weight is added to the suspension so you shouldn't even notice a difference in ride quality while unloaded. You should notice more stability when making turns though and not feel as much side-to-side sway.

Answer 1

Hello Sonya, thanks for reaching out. The Weigh Safe True Tow Weight Distribution Hitch #WS79VR will work nicely with the Ember Overland 190MSL. The weigh safe WD hitch is made for trailer with a GVWR under 8,500 lbs, and the 190MSL has a 5,815 lb…

view full answer...

Answer 2

The Roadactive Suspension kits (formerly Roadmaster) are the best suspension enhancement solutions. They give you all of the support you are wanting to get rid of the sag but do not make ride quality worse. Actually they make the ride quality better,…

view full answer...

Answer 3

For fifth wheel towing it really is going to depend on the weight of your trailer whether you would want the standard duty RoadActive Suspension Kit part #RAS3611-S or the HD version part #RAS3611-SLHD. One big factor to consider is whether or not…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Will The RoadActive Suspension System Fit A 2023 Ford F-350 DRW

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching