Availability of Bolt for Center Hole of Equalizer part # 13-119-03
Updated 11/03/2025 | Published 01/06/2025
Products Featured in This Question
Question:
Hi, What bolts go with this equalizer? 13-119-03 If I could also get the part numbers for the equalizer bolts that would be great. Thank you.
asked by: Tatyana K
0
Expert Reply:
Hey Tatyana, the center hole on the equalizer part # 13-119-03 is one inch in diameter so for a bolt that fits that you'd want the part # 7-136-2 which is a wet bolt with a zerk fitting.
For a lock nut you'd then want the part # 6-112.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Equalizer for 2" Wide Slipper Springs - 23-1/2" Long - 1" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 23-1/2 Inch Long
- Tandem Axle
- Triple Axle
- Dexter
more information >
Continue Researching
- Video: A Closer Look at the Rubber Bushing with Steel Sleeve
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 4" Long
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 48-1/2" Axle Spacing
- Shop: Equalizer for 2" Wide Slipper Springs - 23-1/2" Long - 1" Center Hole
- Shop: Rubber Bushing with Steel Sleeve - 5/8" ID, 1-3/8" OD - 2-3/16" Long
- Shop: Equalizer Suspension Bolt with Grease Zerk Fitting - 5-1/4" Long
- Search Results: trailer tires and wheels
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer jack
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Search Results: trailer leaf springs
- Shop: Suspension Enhancement
- Shop: Gooseneck Hitch
- Search Results: trailer suspension parts
- Search Results: trailer hubs and drums
- Search Results: trailer axles
- Search Results: trailer breakaway kit
- Q&A: Looking For Replacement Bearing, Seal, Race Kit For 2009 Weekend Warrior Toy Haler FSC 3200 3 Axle
- Q&A: How To Find Correct Replacement Equalizer for Take 3 Trailer
- Q&A: Grease Seals Needed for a Weekend Warrior Triple Axle Trailer with 6000 Pound Axles
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
- Q&A: Torque for U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles
- Article: How to Measure a Trailer Axle
- Article: How to Raise Your Travel Trailer Height
- Article: How to Charge a Dump Trailer Battery
Jameson C.
11/3/2025
Hey Tatyana, how did the wet bolt and lock nut work out with your equalizer? Knowing how the fit turned out could help others matching parts for their suspension setup.