How To Find Correct Replacement Equalizer for Take 3 Trailer
Published 10/26/2022 >
Question:
Hi I’m interested I. Purchasing an equalizer for a 2016 take 3 trailer with the bolts , can you please let me know if you have this available? Thank you
asked by: Rosanna
Expert Reply:
In order to find out what equalizer you need for your trailer you'll first want to determine what type of leaf springs you have, slipper or double eye. Once you have this info you'll then want to look for a part number stamped onto the equalizer. If none are present, record the dimensions of the hole on center both left to right and top to bottom. The Curved Equalizer part # TREQE1 for example is a pretty common replacement for double eye leaf spring trailers, it measures 7-3/4" left to right and 3-3/16" top to bottom.
I have attached our full selection of equalizers below as well as a photo showing how to measure.
Product Page this Question was Asked From
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: equalizer
- Shop: Equalizer for 2" Wide Slipper Springs - 23-1/2" Long - 1" Center Hole
- Search Results: trailer leaf springs
- Search Results: equalizers
- Search Results: standard equalizer trailer suspension parts
- Search Results: 14125a bearing
- Search Results: jack
- Shop: Dexter Tandem-Axle Trailer Equalizer Kit for 2-1/2" Slipper Springs - 24-5/8" Equalizers
- Search Results: leaf spring lift kit
- Shop: Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 23-1/2" Long Equalizers
- Shop: Equalizer for 2-1/2" Wide Slipper Springs - LH or RH - 24-7/8" Long - 1" Center Hole
- Video: Feature Breakdown: Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 48-1/2" Axle Spacing
- Shop: Dexstar Steel Mod Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - Black w/ Red Stripes
- Video: All About the Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Video: All You Need to Know About the Timken Replacement Trailer Wheel Bearing
- Video: Breaking Down the Dexter 6-Leaf Slipper Spring for 9,000-lb Trailer Axles
- Video: Let’s Check Out the Equalizer for 2" Wide Slipper Springs
- Video: A Closer Look at the Rubber Bushing with Steel Sleeve
- Video: Hands-On with the Dexter 6-Leaf Slipper Spring w/ Flat End for 12,000-lb Trailer Axles
- Shop: Trailer Wiring
- Shop: Vehicle Tow Bar Wiring
- Shop: Fifth Wheel Hitch
- Q&A: Equalizer Replacement Options for Dexter 13-122 Equalizer
- Q&A: Looking For Replacement Bearing, Seal, Race Kit For 2009 Weekend Warrior Toy Haler FSC 3200 3 Axle
- Q&A: Looking for Replacement Leaf Springs and Bearing Kit for 3,500 lb Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Grease Seals Needed for a Weekend Warrior Triple Axle Trailer with 6000 Pound Axles
- Article: How to Accurately Measure Trailer Leaf Springs


