Hitch Fitment for a 2024 Nissan Sentra

Question

Question:

Hi is this fit on 2024 nissan Sentra SV??

asked by: Anton

0

Expert Reply:

Hey Anton,

According to my research, your 2024 Nissan Sentra is still the same generation as the 2023 model so the Draw-Tite Sportframe Trailer Hitch Receiver # 24907 should fit on your SV.

If you let me know what you plan on using the hitch for I'd be more than happy to see if there are any additional parts you'll be needing!

expert reply by: Jon G

0

Anton

12/26/2024

Thanks using it just for the bike rack

Jon G.

12/26/2024

@Anton Sounds good! If you don't already have a bike rack then I recommend checking out the Kuat Beta # B202-114 this is one of the hidden gems we have here at etrailer, and what really sets it apart is the 14 lb weight of the rack. It's really easy to tote around as well as store, and it can still hold bikes up to 40 lbs!

Ti.

3/25/2025

For bike rack. 2024 eentra sv?

Jon G.

3/25/2025

@Ti If you're wanting to use a hitch bike rack then I recommend going with the Hollywood Racks Destination Bike Rack # HLY94FR because it weighs in at only 20 lbs so you aren't adding more stress to the receiver.

Answer 1

To determine the size of the receiver lock you will need you need to determine the size (see link below) of the receiver on your vehicle and you also need to measure the overall width of the outside of the receiver at the hitch pin hole. If you have…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Hitch Fitment for a 2024 Nissan Sentra

Continue Researching