How Do I Know If My Westin HDX Grille Guard Has A Punch Plate?

Question

Question:

How do I know if my HDX has a punch plate? My grill guard is for my truck had body damage and body shop lost my brackets.

asked by: James L

0

Expert Reply:

Hey James, thanks for reaching out. The punch plate refers to the mesh looking screen on the top section of the grille guard. The picture below points is out. If you want to email me a picture of your grille guard I should be able to tell you if you have the punch plate or not.

expert reply by: Jesse M

0

Westin Grille Guard Punch Plate Example
(click to enlarge)

Jesse M.

11/17/2025

Hey James, were you able to confirm if your HDX grille guard has the punch plate? Knowing that could help others figure out which replacement brackets they need after body work.

Answer 1

Westin does not have a brush guard compatible with your 2001 GMC Sonoma. They have determined it is not a fit to do so based on the mounting locations for support so if you mount the grille guard pictured you would need to create/fabricate custom…

view full answer...

Answer 2

Hey BJ, the correct replacement hardware kit you need for the Westin HDX Grille Guard for your 2015 Chevy Silverado 2500 would be the part #57-378PK.

view full answer...

Answer 3

Unfortunately, not only are the brackets vehicle specific, the grille guards themselves are vehicle specific as well. If you were to use the #57-378PK brackets for a 2019 Chevy Silverado, there's no guarantee they'd be compatible with your…

view full answer...

Answer 4

Hi Tyler; the Westin HDX Grille Guard #57-3785 is designed to fit the 2015 - 2019 Silverado 2500/3500. The mounting hardware is the #57-378PK you looked at but this will not fit your 2010 Ford F-150. The grille guard itself has a different design to…

view full answer...

Answer 5

Part #57-378PK replaces the hardware and mounting brackets for a Westin HDX Grille Guard with model number #57-3780 and #57-3785, which are designed for a 2015-2019 Silverado 2500/3500, so it will not fit your truck. Hardware kits for grille guards…

view full answer...

Answer 6

The mounting brackets you need are part #57-229PK. They're specifically for the Westin HDX grille guard, part #57-2295 on your 2010 GMC Sierra 1500.

view full answer...

Answer 7

Hello Thomas. I would need to know exactly what grille guard you have in order to recommend the correct hardware. You have a 2013 Tahoe correct? If so, we do have a hardware kit part #AABRKT-4065 which works with the Aries Grille Guard part #AA4065…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

How Do I Know If My Westin HDX Grille Guard Has A Punch Plate?

Product Page this Question was Asked From

Continue Researching