Does Draw Tite Front Hitch 65067 Require Air Dam Modification

Question

Question:

Hi Jameson: Does installation of the hitch Draw Tite Front Hitch part # 65067, requires cutting or removing the air dam? Thanks,

asked by: Yadong

0

Expert Reply:

Hey Yadong, yes the Draw Tite front hitch part # 65067 does require modifying the air dam to install. You'll either need to remove it altogether or cut a slot in it to allow the hitch to pass through it using a utility knife.

expert reply by: Jameson C

0

Jameson C.

11/17/2025

Hey Yadong, how did things go with modifying the air dam for your Draw-Tite front hitch? Sharing what approach you used could really help others planning the same install.

Answer 1

There are few differences between the Draw-Tite Front Mount Trailer Hitch Receiver #65067 and Curt Front Mount Trailer Hitch Receiver #C31083 that fit your 2020 Ford F-150, with the main difference being ground clearance. The Curt hitch does have…

view full answer...

Answer 2

The Draw-Tite Front Mount Trailer Hitch Receiver #65067 and the Curt Front Mount Trailer Hitch Receiver #C31083 are both confirmed to fit your 2020 Ford F-150. They are very similar in design and mount to the same locations on the frame, however the…

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch #C31083 and the Draw-Tite #65067 are extremely similar hitches that are both confirmed to fit your 2018 Ford F-150. Both hitches will mount to the same locations on the truck's frame and feature identical 500…

view full answer...

Answer 4

The only real difference between the Draw-Tite #65052 and Curt #C31012 is the style in which they bolt to the frame. The Draw-Tite is going to have a bolt on each frame rail and one on the crossmember, whereas the Curt is going to have three bolts on…

view full answer...

Answer 5

The Draw Tite part #65067 will sit lower to the ground than the Curt hitch part #C31083 which is also a fit for your 2016 Ford F-150. The Draw Tite requires you to notch a couple inches out of the bottom of the air dam up front, but the Curt requires…

view full answer...

Answer 6

Hey Keith, Ground clearance can definitely be an issue when adding on a second hitch to your F-150, like the Curt #C26HR. If you don't currently have a hitch and are adding one like the etrailer #e63TR then you have a little less to worry about.…

view full answer...

Answer 7

The front mount trailer hitch receiver with the best ground clearance once installed on your 2021 Ford F-150 is the Draw-Tite #65067 in which the bottom of the receiver sits just above the bottom of your air dam so you will not lose any ground…

view full answer...

Answer 8

The Curt Front Mount Hitch #C31083 for your 2020 Ford F-150 actually won't affect the truck's ground clearance at all. This is because the 2" receiver will protrude right through the bottom of the air dam, maintaining the F-150's…

view full answer...

Answer 9

The good news is that neither the Curt #C31083 or the Draw-Tite #65067 front mount trailer hitches will reduce the ground clearance on your 2018 Ford F-150. If you want a receiver that sits above the lowest piece of fascia then the Curt requires that…

view full answer...

Answer 10

In order to carry a gas scooter on the front of a 2019 Ford F-150 you'll need to start with a front mount hitch, the Curt Front Mount Trailer Hitch Receiver part #C31083 is a great option. Then, in order to secure the scooter I recommend using…

view full answer...

Answer 11

The Curt Front Hitch #C31083 for your 2020 Ford F-150 actually won't affect the truck's ground clearance at all. This is because the hitch is designed so that the 2" receiver protrudes through the middle of the lower air dam, instead of…

view full answer...

Answer 12

The Curt Front Mount Trailer Hitch Receiver part #C31083 will work just fine on your 2018 Ford F-150 with Eco Boost Engine. I checked with both Curt as well as past customers as well to confirm this for you. I have also attached a photo of what the…

view full answer...

Does Draw Tite Front Hitch 65067 Require Air Dam Modification

Continue Researching