Replacement Leaf Springs for a 2020 Forrest River Wildwood Platinum 260RTX Toy Hauler

Question

Question:

I would like to replace my leaf springs soon, but Im having a little trouble finding the correct pair. I currently own a 2020 Forrest River Wildwood Platinum 260RTX toy hauler. What do you recommend?

asked by: Mike S

0

Expert Reply:

Hey Mike,

While I don't know what exact leaf springs came on your 2020 Forrest River Wildwood Platinum 260RTX Toy Hauler, it looks like you should have 3,500 lb axles so that gives us one piece of the puzzle.

The 25-1/8" Long Leaf Spring # e68SR is a standard length for this, but if you can verify the center eye to center eye length of your unloaded leaf spring that will tell us if this is the correct length for you, or if you need to filter through the linked selection for one that matches better. You can also let me know what you measure and I can recommend something different if needed.

expert reply by: Jon G

0

Mike

6/10/2025

Hello Jon, It's been a while since I asked this question about my leaf springs. I hope to replace them this winter. I'm about 95% sure I'll need the e68SR springs, but can you tell me what else I should replace along with the springs. I'm guessing new U bolts? Anything else?

Jon G.

6/16/2025

@Mike Technically nothing HAS to be replaced at the same time as your leaf springs, but since you'll have the trailer jacked up and the suspension pulled all apart, it's a great opportunity to inspect and replace other parts as well. Basically, if something looks worn and rusted it's a good idea to replace it. You can also add some upgrades as well like the MORryde Kit # MR46ZR for 2-1/4" shackle straps or Kit # MR76ZR for 3-1/8" shackle straps. These are extremely popular because the straps are 1/2" thick (so much more durable than standard straps) and it comes with new bushings and bolts as well. Are your U-Bolts looking a bit worn?

Answer 1

Hey Dan, yeah eventually the battery of your Maverick would get drained by the supplemental braking system of the flat towing setup so what you'd want is a charge kit like the part #RM-156-25 so that your tow vehicle can keep the Maverick's…

view full answer...

Answer 2

As long as the weight capacity is inline with your trailer/axle rating and the measurements match your current springs, the number of leaves in a spring pack does not matter. The difference between a 3 and 4 leaf spring pack within the same weight…

view full answer...

Answer 3

Hi Michael, you’re on the right track and your install and measurements sound solid, but the sag you’re seeing is because the springs you installed are undersized for your axle rating. Even though they matched up perfectly in length, the capacity is…

view full answer...

Answer 4

Hey Joey! Our own etrailer branded hubs like #AKIHUB-545-35-G-K only come with the galvanized or standard finish. For a stainless steel idler hub you need the Kodiak #KH84545S. This does not come with bearings so you can use #BK2-100 for a complete…

view full answer...

Answer 5

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Jason, it's pretty common for replacement leaf springs to be slightly shorter than what they replace as springs tend to stretch/flatten overtime as they wear out so while you are on the right track 3/4 of an inch is a bit too much of a…

view full answer...

Answer 8

Leaf springs flatten out over time, so since yours are 25-1/2" center to center, you'll want to go with ones a little shorter than that: - 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long - Dacromet #e93SR The #e93SR…

view full answer...

Answer 9

Thank you for providing all of that information! From the photos and dimensions it looks like you have the suspension kit that's equivalent to the Tandem-Axle Trailer Hanger Kit #APT5. For your axle and hanger spacing you need lead springs that…

view full answer...

Replacement Leaf Springs for a 2020 Forrest River Wildwood Platinum 260RTX Toy Hauler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching