Will Kodiak Disc Brake Kit Fit 40' Flatbed Trailer With 10k Axles
Updated 12/22/2025 | Published 10/27/2024 >
Products Featured in This Question
Question:
Good morning, I have a 40’ flat bed trailer, 10k pounds axes and I’m considering change the break system from electrics to hydraulics, could you please tell me if this part will be suitable for me, the trailer is a 2022 40’ flatbed gooseneck, thanks
asked by: Arnel
Expert Reply:
Hi Arnel; the Kodiak Disc Brake Kit # K2HR10-13-HD is specific to 10k ALKO axles with a #99 spindle. You have a 2022 trailer so I'm sure you do not have ALKO axles since they were discontinued quite a while ago.
Assuming you have leaf springs, you may be able to use the # K2R1058D11E along with the Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 # 008-430-03. The hub uses the # 387A inner and # 25580 outer bearing so I would make sure that matches your axle.
You will also need the Hydrastar Electric Over Hydraulic Actuator # HBA16. Then for brake lines you can use the # HS496-252 for tandem or # HS496-253 for triple axles.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Availability of Replacement Brake Pad for 2012 PJ Gooseneck with 12k AL KO Axle
- Video: Hands-On with the Kodiak 11" Rotor
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Replacement Bearing - 25580
- Video: Kodiak 11" Rotor Review
- Video: Kodiak Hub Spacer for 9K and 10K Axle Spec Review
- Video: All About the Kodiak Ceramic Brake Pads
- Search Results: 28580
- Search Results: 91030
- Search Results: 25580
- Shop: Kodiak 11" Rotor - Dacromet Finish - 9,000 lbs to 10,000 lbs
- Shop: Replacement Rubber Dust Boot for Kodiak Disc Brake Calipers - 9,000 lbs to 10,000 lbs
- Shop: Kodiak Disc Brake Caliper - Stainless Steel - 9,000 lbs to 10,000 lbs - Right Hand
- Shop: Kodiak Hub Spacer for 9K and 10K Axle
- Shop: Replacement Rubber Piston Seal for Kodiak Disc Brake Calipers - 9,000 lbs to 10,000 lbs
- Shop: Replacement Trailer Wheel Bearing - 25580 - Qty 1
- Shop: Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 10,000 lbs to 15,000 lbs
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Search Results: trailer jack
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Search Results: trailer wiring


Robin H.
12/22/2025
Hey Arnel, how did the switch from electric to hydraulic brakes go on your 40' flatbed trailer? Were the Kodiak kit and Hydrastar actuator a good match for your setup? Your update could make it easier for others working on similar trailers.