Threaded Grease Cap With 3.5" Outer Diameter
Updated 10/24/2024 | Published 10/23/2024
Question:
Im looking to purchase 3.5o.d. threaded grease caps and Im not sure what axle I have. From the face of the hub where the cap threads on, the end of the shaft/axle nut sticks out 1.25 past the hub.
asked by: Jeff K
Expert Reply:
Hi Jeff; we only have one threaded grease cap that matches that outer diameter. The Valcrum Universal Threaded Aluminum Oil Bath or Grease Cap # VA95JR. This is designed to replace Dexter 21-88 or K71-704-00 oil caps on #13G drums manufactured after 7/2009. If you have Dexter hubs you should be able to find a part number stamped into them. You could also identify your axle and potentially the hubs using the axle tag.
Product Page this Question was Asked From
Valcrum Universal Threaded Aluminum Oil Bath or Grease Cap for Dexter 9K to 10K GD Axles - Black
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- Threaded Grease Cap
- 3.50 Inch O.D.
- 3.50 Inch
- 9000 lbs Axle
- 10000 lbs Axle
- Valcrum
more information >
Continue Researching
- Video: Review of Valcrum Trailer Bearings Races Seals Caps - Caps - VA95JR
- Video: Review of Valcrum Trailer Bearings Races Seals Caps - Caps - VA35JR
- Shop: Valcrum Universal Threaded Aluminum Oil Bath or Grease Cap for Dexter 9K to 10K GD Axles - Black
- Shop: Dexter Fortress Threaded Aluminum Oil Cap for 10K to 15K Axles
- Shop: Valcrum Universal Threaded Aluminum Oil Bath or Grease Cap for AL-KO 6K to 8K Axles - Black
- Shop: Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98"
- Shop: Dexter Fortress Threaded Aluminum Oil Cap for 5.2K to 8K Axles
- Shop: Valcrum Universal Threaded Aluminum Oil Bath or Grease Cap for 9K to 16K Axles - Black
- Shop: Titan Chain Strap for Truck and Trailer Winch - Flat Hook - 4" x 55' - 5,400 lbs
- Q&A: What Is The Correct Oil To Use In My Dexter Axles With Oil Lube Bath Hubs?
- Q&A: Replacement Motor For Lippert High-Speed Power Stabilizer Jack # LC337199 On a Travel Trailer
- Q&A: Should There Be A Gap Between The Seal and The Inner Bearing In My Hub
- Q&A: How to Determine What the Correct Replacement Hub Is
- Q&A: Correct Center Bolts And Spring Eye Bolt To Go With 13-140-3 Equalizer
- Q&A: Nev-R-Lube Trailer Bearings Cannot be Replaced with Regular Bearings
- Q&A: Recommended Aluminum Oil Cap Cover to Replace a Dexter 21-88
- Article: How to Measure a Trailer Axle
- Article: How to Install E-Track in 3 Easy Steps
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Article: Is It Illegal to Leave My Hitch on My Truck?
Jeff K.
10/24/2024
Are you able to show all the dimensions of said grease cap?