Will etrailer RV Cover part # e99VV Work in Wet and Winter Weather

Question

Question:

Will this cover work well in the snow and rain and keep the water off of my trailer which is stored in the open on an RV pad?

asked by: Mitch

0

Expert Reply:

Hey Mitch, yes the etrailer RV cover part # e99VV will do great to protect your RV from snow and rain like you asked about. It is a great all-climate cover that would work well for you.

expert reply by: Jameson C

0

Answer 1

The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler #AD89ZR will be a better choice then The Classic Accessories PermaPRO Deluxe Extra Tall 5th Wheel Cover or Toy Hauler Cover #CA80-299-203101-RT. The Adco cover works best for…

view full answer...

Answer 2

Hi James, They definitely will; we know most people store their 5th wheels outside, and there's a lot of different weather conditions to consider, and strong wind was certainly one of them. So they'll hold up well to wind due to the vented…

view full answer...

Answer 3

Hey Mike! That side opening of the etrailer cover item #e99VV is going to be 10-1/2" from the front of where it attaches to your 5th wheel trailer. I linked a review video below so you can get a quick walk-thru of the features and installation…

view full answer...

Answer 4

Hey Barry, welcome back! Yes, it would definitely benefit you to add the MORryde X-Factor #MR33WR to the front and rear hangers. These, along with an upgraded equalizer like the Center Point #LC1565391, are one of the best upgrades you can make to a…

view full answer...

Answer 5

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 6

Hi Barry; the diameter of the air gauge that comes with the Replacement Air Gauge Panel for Lippert Center Point Air Ride Suspension System #LC42ED is 1-3/4". The small mounting bracket ring that fits around it has holes that are 2" apart…

view full answer...

Answer 7

Hey Jeff, thanks for reaching out. The Replacement Wet Shoulder Bolt #MR52HR comes with just the bolt. The nuts are sold separately but we do have those available. For that bolt you'll need the following: - Replacement Grade 5 Flange Lock Nut for…

view full answer...

Answer 8

Hey John! You can use the Lippert Center Point #LC1565391 as long as you meet the requirements. I'm sure you have standard 1-3/4" leaf springs. You will also need to make sure your minimum hanger height is 2-1/2" from the equalizer bolt…

view full answer...

Answer 9

Hey JT! Sorry to hear about your trouble with the leaf springs. Hopefully there wasn't a lot of damage and everyone stayed safe. From what I have found the 26E-3500 is the same as the Dexter 072-027-00. This is the 6-Leaf Double-Eye Spring for…

view full answer...

Answer 10

Hey John! With the CRE3000 on your Reflection you need the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR. The same crossmember will be used on all three sets of hangers. The one thing I would do is take a look under your trailer to…

view full answer...

Answer 11

Hi William! Thanks for the picture of your axle tag. The correct bearing kit is the #BK3-200 with a 10-36 grease seal. If you want the Dexter version it is the #DX58ER, Are you getting your Momentum ready for spring/summer? Any big trips coming up?

view full answer...

Answer 12

This is a really good question but you do not have to install anything beyond what comes with the Lippert Center Point #LC1565391. The 2 inch lift that gets added does not need to be compensated with longer hangers. So with just this kit you'll…

view full answer...

Will etrailer RV Cover part # e99VV Work in Wet and Winter Weather

Product Page this Question was Asked From

Continue Researching