Does Curt Front Mount Trailer Hitch Fit 2014 Ford F-150 Lariat EcoBoost

Question

Question:

Will this fit on a 2014 f-150 ecoboost lariat?

asked by: Parker H

0

Expert Reply:

Hey Parker,

Yep, it sure will; the correct front hitch that does fit your 2014 Ford F-150 Lariat EcoBoost is the following from Curt:

- Curt Front Mount Trailer Hitch Receiver # C31068

I went ahead and verified this with Curt for you.

expert reply by: Kyle S

0

Heather A.

12/22/2025

Hey Parker, how did the Curt front hitch work out on your F-150 EcoBoost? Your feedback could really help others looking for the same fit.

Answer 1

To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.

view full answer...

Answer 2

Hey Ted, thanks for reaching out! The (discontinued) Draw-Tite 65061 hitch will fit exactly the same as the Curt #C31068 front hitch on your 2009 Ford F-150. The only difference being that the Draw-Tite sticks out further, as you mentioned. Some…

view full answer...

Answer 3

I recommend the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR for your 2021 Ram 3500. This 2" receiver is rated for a vertical load up to 1000lbs, trailer weight of 3,500lbs, and a line pull of 10,000lbs. This receiver will include…

view full answer...

Answer 4

Hey John! The only option we have for a front hitch on your 2017 Ford Expedition is the Curt item #C31068 you were looking at. It does have a 500 lbs tongue weight capacity so I am going to have to recommend you follow it even though you're just…

view full answer...

Answer 5

By "snaking" I presume you are referring to trailer sway, with the car hauler's rear end moving side to side above the 45 mph speed you mentioned. Trailer sway like this usually has one cause: too low tongue weight (TW). Car hauler…

view full answer...

Answer 6

I attached a picture of the mounting holes for the Bulldog Heavy-Duty A-Frame Coupler, #BD44150WH301 that you referenced for you to check out so that you can compare them to the ones on your current coupler. Based on the picture you submitted this…

view full answer...

Answer 7

The air dam has to be permanently removed on a 2011 and newer For F-150 to install Curt front mount hitch receiver #C31068. Installation on your 2012 F-150 will be basically identical to the 2014 model in the video I have linked showing an example…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

There are few differences between the Draw-Tite Front Mount Trailer Hitch Receiver #65067 and Curt Front Mount Trailer Hitch Receiver #C31083 that fit your 2020 Ford F-150, with the main difference being ground clearance. The Curt hitch does have…

view full answer...

Answer 10

The front air dam on your 2023 Ford F-150 Platinum will actually need to be removed to be able to install any of the front hitches. So yes, the front air dam will no longer be operational once you have the EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 11

The Curt Front Mount Trailer Hitch Receiver part #C31083 will work just fine on your 2018 Ford F-150 with Eco Boost Engine. I checked with both Curt as well as past customers as well to confirm this for you. I have also attached a photo of what the…

view full answer...

Answer 12

Hey Mike, I double checked with Curt just now and their front hitch part #C31083 does fit your 2018 Ford F-150 with the 2.7 liter ecoboost! What are you planning on using the hitch for?

view full answer...

Does Curt Front Mount Trailer Hitch Fit 2014 Ford F-150 Lariat EcoBoost

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching