Will the Inno Roof Deck Platform Rack INA510 Fit Toyota Crossbars?

Question

Question:

Hello, Can the Inas 520 be mounted on 2024 Toyota 4runner crossbars? Thank you.

asked by: George G

0

Expert Reply:

Hey George, it should fit! It's going to depend on the size of the factory crossbars on your 2024 Toyota 4Runner. The Inno Roof Deck Platform Rack item # INA510 will work with crossbars up to 3-1/2" wide x 1-3/8" tall. You'll also need to have them spaced out between 20" - 36".

I have linked a review video below so you can see some of the features of this platform rack demonstrated.

expert reply by: Jerred H

0

Jerred H.

1/5/2026

Hey George, how did the fit work out with the Inno Roof Deck Platform Rack on your 4Runner’s crossbars? It’d be great to hear if the spacing and size matched up as expected. Your feedback could help others looking at the same setup.

Answer 1

Yes. The T-slots in the Tesla factory cross bars were designed to be used with a wide variety of accessory manufacturer's products-especially those that fit in the T-slots of crossbars. For that reason you will be able to use the Replacement…

view full answer...

Answer 2

The Inno Shaper80 cargo basket part #INXA568 measures 46-1/2" x 32-1/2" so for a cargo net I would go with the Yakima Stretch Net part #Y07072 which measures 38 by 32 inches. This is a high quality stretchable cargo net that would do a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hey Gary, thanks for reaching out. You will want to make sure you are loosening the hand knob as much as possible before attempting to remove the rack from the hitch. If there is any tension left on the wedge it will make it hard to remove. Dirt,…

view full answer...

Will the Inno Roof Deck Platform Rack INA510 Fit Toyota Crossbars?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching