Customers compare sps4550-1101 to these similar products
Products Featured in this Video
Today on our 2012 Toyota 4Runner we're going to be doing a test fit of the Surco Safari 5.0 cargo carrier. This is going to be your roof mounted basket. It's going to be 50 inches long, 45 inches wide, have a depth of 5 inches, have a sturdy steel construction, and it's going to have a 250 pound weight capacity. It's going to be Part Number SPS4550-1101. The first thing with this rack is you're… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thule doesn't have available single components, and they have also recently changed the way their rack systems work, so even if they did, you'd have basically components of two different systems. For less than the money you'd spend on…
view full answer...I contacted Rhino Rack and the Rhino-Rack XTray Pro Cargo Basket part #RRRMCB03 has a weight capacity of 165 lbs. You do want to make sure you are not exceeding the weight capacity of your roof rack bars and the roof capacity of your vehicle. The…
view full answer...You can use a cable like part #8291DPS to lock the basket to your crossbars, but unfortunately there isn't a lock designed to lock the Rhino-Rack XTray Pro Cargo Basket #RRRMCB03.
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…
view full answer...The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…
view full answer...There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
view full answer...Hi Betsy, The older feet that would work with your older Thule square bar crossbars unfortunately have been discontinued, but luckily Inno square bar feet are compatible with these crossbars. To mount your crossbars on your 2024 Toyota RAV4…
view full answer...For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…
view full answer...Hello Reyes; at this time (September 2024) there are no Rhino-Rack roof racks confirmed to fit your 2024 GMC Acadia AT4. The only roof racks we have that are confirmed to fit your raised rails are from Malone like the AirFlow2 #MAL74AR or #MPG215.
view full answer...Hi Scott, Really good question and yes, all of the necessary hardware that is needed for installation comes with the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. I've added a photo for you…
view full answer...