Brophy Camper Tie Downs for 2024 Ford F-250

Question

Question:

Hello I have a 2024 f250 super duty witch bed pocket tie down should I get for slide in camper front of bed rail measures 6 and 1/2 the back is four i do believe

asked by: Brad E

0

Expert Reply:

Hi Brad; the Brophy Stake Pocket Mounted Camper Tie-Downs # TDSF are designed to be universal but according to Brophy they do not fit newer model trucks starting with 2011. The Brophy Slide In Camper Tie-Downs # HSWB are what you will need to use if you want the Brophy tie downs for your 2024 F-250. These clamp on instead of fitting in the stake pockets.

expert reply by: Robin H

0

Robin H.

1/12/2026

Hey Brad, how did the Brophy clamp-on tie-downs work out with your F-250 and camper setup? Your feedback could really help others trying to secure a slide-in camper on a newer Super Duty.

Answer 1

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Answer 2

You can use the Brophy Clamp On Camper Tie-Downs #HSAB for your 2018 Ford F-350 Super Duty but we actually recommend going with the Camper Tie-Downs #HSSF instead as they have a slightly different design that better fits your Super Duty. Attached are…

view full answer...

Answer 3

Hello Robert, Great question, we have reached out to Brophy in the past about this exact issue. They recommend using the #HSSF for aluminum beds like yours, just as long as there is two inches of clearance under the lip of the bedside (please refer…

view full answer...

Answer 4

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 5

For tie-downs that will work in your 2001 Toyota Tundra you will want the Brophy Clamp On Camper Tie-Downs #HSSF. Brophy has told us in the past that the #HSWB was intended for domestic trucks. These tie-downs are compatible with the turnbuckles…

view full answer...

Answer 6

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Brophy Camper Tie Downs for 2024 Ford F-250

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching