Replacement Wheel for a InTech Sol Dawn RV

Question

Question:

Hey there. Looking for black aluminum wheel - 15, 5 lugs that is factory issue on inTechs sol dawn/rover. Fits a 225/75 tire. I can send pic. Thanks.

asked by: Bill K

0

Expert Reply:

Hey Bill! I don't have any database that will show me what's on your InTech Sol Dawn RV so if you could email me back a picture at the address you received this one from I would be happy to look at what we have available and see if there's a match.

expert reply by: Jerred H

0

Jerred H.

1/5/2026

Hey Bill, were you able to send over that picture of your InTech Sol Dawn wheel? Knowing what you found could help others trying to match the same factory setup.

Answer 1

We sure do Matt! To add a center cap to the Aluminum AM03 Series Matte Black Machined Trailer Wheel item #AM53NR you can use the Americana Trailer Wheel Center Cap item #AM90175 for stainless or item #CXF106B for black. I recommend going with the…

view full answer...

Answer 2

Hello Mark. Black is the best color, and I do have an option for you, but as far as the 225/75-15 tire/wheel combos, we do not offer anything other than plain white or silver wheels. That said, if you were to purchase a tire and wheel separately,…

view full answer...

Answer 3

Hey Kyle! For lug nuts you can use the Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel #LHLR103. Since the #LH26VR has a 4.25" pilot diameter you can use the Taskmaster Trailer Wheel Center Cap w/Center Plug #TA46QR.

view full answer...

Answer 4

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…

view full answer...

Answer 5

Hello Jarrod, thanks for reaching out. The main difference between the Dexter #DX29FR and #DX89FR is how they attach to the trailer tongue. Each will fit a 3" wide tongue. The #DX29FR is designed to bolt onto the end of the tongue, whereas the…

view full answer...

Answer 6

We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…

view full answer...

Answer 7

Hey Brandon! Yes, the Aluminum AM06 Series Black Machined Trailer Wheel #AM58FV does have steel inserts in the lug nut holes. These inserts reinforce the lug seating area on the aluminum wheel to reduce wear and help maintain proper torque over time.…

view full answer...

Answer 8

Westlake tires like the Westlake ST225/75R15 Radial Trailer Tire #LHWL304 that you referenced are the nicest brand we carry. I'd recommend and rate these very highly. You'd really like these and they would work well. They have a higher speed…

view full answer...

Answer 9

Thanks for the photos of your trailer's actuator! They were very helpful in answering your questions. Based on the photos, it appears that you have a Titan Model 10 Actuator #T1607500. For a Model 10 actuator, the #DX66FR that you referenced is…

view full answer...

Answer 10

Hey Steve, on the Dexter Actuator part #T1607500 the length of the main body of the coupler measures 16 inches.

view full answer...

Answer 11

The top width of the Titan Brake Actuator - Painted - Disc - 2-5/16" Ball - Weld On - 12,500 lbs #T4749600 you were looking at measures right at 4" as shown in the included diagram. This will be the exact same dimension as the #T1607500,…

view full answer...

Answer 12

Hey Mike. The Kenda Karrier KR53 ST225/75R15 Radial Trailer Tire with 15" Black Aluminum Wheel item #KE63JV comes mounted and ready to install. However, it is not balanced and this is common amongst trailer tires. Trailer tires are lug-centric…

view full answer...

Replacement Wheel for a InTech Sol Dawn RV

Product Page this Question was Asked From

Continue Researching