Looking For Replacement Motor For Furrion Range Hood Vent Fan

Question

Question:

Do you have a 12 v 5-inch replace oven vent fan with motor for airstream, or some small retrofit? Thanks!

asked by: Charles E

0

Expert Reply:

Hello Charles, thanks for reaching out. We do offer a replacement fan blade, the Replacement Fan Blade for Furrion RV 12-Volt Ducted Range Hoods # FR63MR which will fit the 12v Furrion Range Hoods. I am sorry to say that the motor itself is not available as a replacement parts. If you motor has gone bad, I recommend replacing the entire range hood with part # FHO23SACRBL.

We do offer replacement motors for the Ventline brand range hoods like part # BVD0278-00 but at this time there is no known retrofit so you would have to get creative in order to make it work.

expert reply by: Jesse M

0

Answer 1

The Replacement Fan Blade for Furrion RV 12-Volt Range Hoods part #FR63MR is not threaded. If you remove the nut you can pull it straight off.

view full answer...

Answer 2

The replacement motor you need is the Replacement Fan Motor for Ventline Range Hoods, Item #BVD0278-00. This 2-speed motor is meant to be a replacement motor for Ventline range hoods so it should work for you. The motor can be wired as a low single…

view full answer...

Answer 3

Sounds like you are looking for the part #BVD0278-00. This is a 2 speed motor designed for Ventline range hoods like it sounds like you have.

view full answer...

Answer 4

I checked with my contact at Ventline and for your PR-8 100-CFM range hood the correct replacement motor is the part #BVD0278-00. Then for the fan blade you will need part #BCD0409-00.

view full answer...

Answer 5

The correct replacement motor for your Ventline range hood model PR-8 100-CFM is the #BVD0278-00. If you need the fan blade as well, the correct part is the #BCD0409-00. The price for both can be found on the product page below the name of the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…

view full answer...

Answer 8

Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...

Answer 12

To ensure you get the correct kit Dave, you will need to select for your bed length on your 2022 GMC Sierra 2500HD AT4 and if you prefer to have the standard Tie-Downs or the upgraded Talons which have aluminum arms with stainless steel mounts.…

view full answer...

Looking For Replacement Motor For Furrion Range Hood Vent Fan

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching