Air Bag Kit for Truck with Lift and Rails 2002 Ford F-250

Question

Question:

Looking for an outside the frame airbag kit that will work with a bandw BWRVR3200 universal rail kit I have installed on my 02 4x4 f250, will this airbag AL57298 fit with my setup? Also I have a 6 inch leaf spring lift on the truck and planned on using an airbag spacer to make them fit properly, being that the leaf spring is much further away now from the frame vs. stock suspension Thank you

asked by: Chad

0

Expert Reply:

All of the air bag kits we offer for your truck are designed to mount to the OEM leaf spring setup on some level so if the lift kit you have relocated the leaf springs I don't believe anything we offer could be confirmed as a fit.

expert reply by: Jameson C

0

Chad

8/29/2024

Looking for an outside the frame airbag kit that will work with a b&w BWRVR3200 universal rail kit I have installed on my 02 4x4 f250, will this airbag kit AL57298 fit with my setup?

Jameson C.

9/3/2024

@Chad Okay so I definitely misunderstood your first question and I am sorry about that. The part # AL57298 does fit your truck but since you have a 6 inch lift you'd also need the spacer kit part # AL52460 to take up the additional space created.

Answer 1

I found some photos of a Palomino Bronco 1251 online and the best replacement taillight option we have would be the Bargman LED Double Tail Light part #47-84-008 which would be a nice LED upgrade as well.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 11

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 12

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Air Bag Kit for Truck with Lift and Rails 2002 Ford F-250

Product Page this Question was Asked From

Continue Researching