Surge Brake Coupler Recommendation for a 1988 MAGIC Model MT Boat Trailer
Published 05/20/2014
Question:
I have a 88 MAGIC Model MT Boat trailer gross wt 3500 lb. Our trailer service shop put on a Atwood 85778 coupling with brakes. Almost immediately after putting it in service I found that the latch on the top used to close the coupling on the ball would not close. And if you were able to somehow get it closed after prying it for 20 min then you could never get it open again. Apparently the rust or corrosion prevented the mechanism from closing. I went back to the dealer after a couple of years of having to lash the hitch to the ball and had him put on a new one. The new one stopped working within a month of installation before I put the boat in the water for the first time. It appears to me that the Titan model has a mechanism for closing on the ball that should be much better than the Atwood. What do you recommend. Thanks.
asked by: Terry C
Expert Reply:
The Dexter Zinc-Plated Brake Actuator # 099-175-00 is the replacement for the Titan Leverlock actuator that you referenced. This replacement option by Dexter who bought out Titan is a stronger coupler with many similar components. This actuator has a new latch system that fits 2 inch trailer hitch balls. It will be a significant upgrade from your Atwood actuator.
Product Page this Question was Asked From
Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Construction Trailer
- Farm Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: flexible hydraulic brake lines
- Shop: Demco DA86 Trailer Brake Actuator - Drum - Zinc - 2" Ball - 8,600 lbs
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Dexter Steel 3/16" Brake Line Tubing - 4-1/2"
- Video: Feature Breakdown: Dexter DX7.5 Drop-N-Go Brake Actuator
- Search Results: accessories and parts
- Search Results: trailer brakes
- Search Results: brake actuator
- Search Results: brass brake line fittings
- Search Results: flexible brake hose
- Search Results: 3 x 3 inch tongue folding trailer tongue
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Video: A Closer Look at the Dexter Steel Brake Line Tubing
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Q&A: What is Mounting Hole Spacing of Demco DA75 Trailer Brake Actuator for Drum Brakes # DM33CV
- Shop: Demco DA75 Trailer Brake Actuator for Drum Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Shop: Dexter Standard Swing Tongue Kit for 3" x 3" Tongue - Weld On
- Q&A: Can Demco Surge Actuator Replace Atwood Without Requiring New Hardware
- Q&A: How To Bleed Brakes With Demco Hydraulic Brake Actuator
- Video: Review of Demco Manual Lock Out Kit Model DA75 - DM93CV
- Video: Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators Review
- Shop: Manual Reverse Lockout Kit for Demco Hydraulic Trailer Brake Actuators
- Video: Detailed Breakdown of the Dexter Brake Actuator with Manual Lockout
- Q&A: Overall Outside Width of Dexter DX7.5 Actuator
- Q&A: Master Cylinder Replacement Kit Needed for Dexter DX7.5 Drum Actuator # 099-175-00
- Q&A: Dimensions of Dexter DX7.5 Drop-n-Go Actuator part # 099-175-00
- Q&A: What Is The Difference Between A Disc Brake and Drum Brake Surge Brake Actuator?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
on Brake Actuator
