Trailer Hopping With Empty Trailer After Installing Dexter DX7.5 Drop-N-Go Actuator 099-175-00
Updated 07/20/2022 | Published 07/19/2022
Question:
I just finished installing a dx7.5 and go hitch. Bled the system thoroughly. When pulling the trailer empty and stopping. The wheels hop and chirp. Might be because of drums have rust on them and I havent pulled a loaded boat yet? Any ideas?
asked by: Kevin K
Expert Reply:
Correct; since the trailer is currently empty, there is going to be some hopping of the wheels, and it would not have to do with the install of the Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs # 099-175-00.
Once you have a loaded trailer, the weight on the trailer will stop or greatly minimize any of the hopping you are experiencing.
Product Page this Question was Asked From
Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Construction Trailer
- Farm Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Search Results: flexible hydraulic brake lines
- Shop: Demco DA86 Trailer Brake Actuator - Drum - Zinc - 2" Ball - 8,600 lbs
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Dexter Steel 3/16" Brake Line Tubing - 4-1/2"
- Video: Feature Breakdown: Dexter DX7.5 Drop-N-Go Brake Actuator
- Search Results: trailer brakes
- Search Results: accessories and parts
- Search Results: brass brake line fittings
- Search Results: brake actuator
- Search Results: flexible brake hose
- Search Results: 3 x 3 inch tongue folding trailer tongue
- Video: A Closer Look at the Dexter Steel Brake Line Tubing
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Q&A: What is Mounting Hole Spacing of Demco DA75 Trailer Brake Actuator for Drum Brakes # DM33CV
- Shop: Demco DA75 Trailer Brake Actuator for Drum Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Shop: Dexter Standard Swing Tongue Kit for 3" x 3" Tongue - Weld On
- Q&A: Can Demco Surge Actuator Replace Atwood Without Requiring New Hardware
- Q&A: How To Bleed Brakes With Demco Hydraulic Brake Actuator
- Video: Review of Demco Manual Lock Out Kit Model DA75 - DM93CV
- Video: Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators Review
- Shop: Manual Reverse Lockout Kit for Demco Hydraulic Trailer Brake Actuators
- Video: Detailed Breakdown of the Dexter Brake Actuator with Manual Lockout
- Q&A: Overall Outside Width of Dexter DX7.5 Actuator
- Q&A: Master Cylinder Replacement Kit Needed for Dexter DX7.5 Drum Actuator # 099-175-00
- Q&A: What Is The Difference Between A Disc Brake and Drum Brake Surge Brake Actuator?
- Q&A: Dimensions of Dexter DX7.5 Drop-n-Go Actuator part # 099-175-00
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
on Brake Actuator
