Does Ladder Roller For Rhino-Rack HD Crossbar Sit Level With Crossbar When Mounted

Question

Question:

Does this roller sit level with the crossbar or slightly above it when mounted?

asked by: Robert

0

Expert Reply:

Hi Robert,

The Ladder Roller for Rhino-Rack Heavy-Duty Crossbars # RR1500 will sit level with the crossbars when it is attached.

expert reply by: Kyle S

0

Jerred H.

1/27/2026

Hey Robert, how did the ladder roller end up working with your Rhino-Rack crossbars? It’d be great to hear if sitting level with the bars made loading your gear easier. Your update could make it easier for the next person setting up a similar rack.

Answer 1

Hi, Aaron. Yes, the LockRack Ladder Rack Base Set with Upright, part #LR96FR, is compatible with the Rhino Rack Sportz roof rack, including the Sportz crossbars in part #RR43HG for the 2024 GMC Sierra 2500 crew cab or double cab with a naked roof.…

view full answer...

Answer 2

I recommend using two of the Ladder Roller for Rhino-Rack Aero/Sportz Crossbars Item #SR680. We do not currently offer a kit to adapt the 59" ladder roller Item #RR1500 to Vortex Aero Crossbars Item #Y02-490B-NT.

view full answer...

Answer 3

I spoke to my contact at Rhino Rack and he informed me that the length of the roller on the Rhino Rack Ladder Roller #RR1500 that you referenced is 56-1/4 inches. Check out the picture I attached to see this measurement.

view full answer...

Answer 4

Hey Brian, thanks for reaching out. I went out to our warehouse and measured one of the etrailer Sidewind Aluminum Jacks #e95YV. The distance from the center of the bracket to the bottom of the wheel is approximately 14" with the jack fully…

view full answer...

Answer 5

Hey David, thanks for reaching out. Yes, we do have a bracket that can be used to mount recovery boards on a roof rack with T-slots. Take a look at the following: - Stow It Recovery Track Holder for Rhino-Rack Pioneer Platform, Reconn-Deck, and…

view full answer...

Answer 6

We do have a single crossbar setup that you can add to your 2020 Ford F-150 and it comes from Rhino-Rack with the following parts: 59" Vortex Crossbar - Silver #RRVA150S or Black #RRVA150B 2500 Series Legs - #RRRLKVAH Fit Kit - #DK427H This…

view full answer...

Answer 7

There are ways you can carry 138 pounds worth of kayak with your 2017 Ford F-150 but I need a little more information. Are you wanting to carry them on the roof, above the bed, in the bed, somewhere else? Will you also be towing a trailer at the same…

view full answer...

Answer 8

According to Yakima, the serial number is stamped into the plastic on the underside of the box next to one of the crossbar clamps.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Does Ladder Roller For Rhino-Rack HD Crossbar Sit Level With Crossbar When Mounted

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching