Cover for 2003 Lance Camper 845

Question

Question:

Hi there! Im looking for a cover for a 2003 lance 845 truck camper, can you help me? Laurie KOehler

asked by: Laureen C

0

Expert Reply:

Hi Laurie; it looks like the 2003 Lance 845 was 16' 5" long based on their old brochure. I recommend using the Camco UltraGuard Slide-In Camper Cover # CAM45771. This is designed for campers that are 16-1/2' long which will make for a perfect fit.

expert reply by: Robin H

0

Robin H.

1/19/2026

Hey Laurie, how did the Camco UltraGuard cover end up fitting your Lance 845 camper? Knowing how it worked out could help others looking for the right size cover for their setup.

Answer 1

For your 2007 Lance 845 truck bed camper the cover I recommend is the Adco SFS Aquashed part #290-12264 which fits campers from 16 foot to 17-3/4 feet. This will fit well and provides best protection. You'd easily be able to tighten the cover…

view full answer...

Answer 2

The wording for truck bed campers is a bit confusing so I reached out to ADCO to clarify how exactly to measure and find the correct cover. The Adco SFS AquaShed RV Cover #290-12262 lists that it's designed to 8' - 10' lengths but…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…

view full answer...

Answer 9

To determine the correct size RV storage cover for your Coleman Lantern LT Travel Trailer you'll need to measure the body length. In the attached picture below you'll see exactly how to measure. Once you have this measurement you can choose…

view full answer...

Answer 10

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

view full answer...

Answer 11

Hey Jim! Unfortunately, your experience is pretty common with RV covers. Constant UV exposure is hard on any cover, and most don't significantly outlast their warranty period. The Classic Accessories PolyPro III #052963793635 uses a triple-ply…

view full answer...

Answer 12

Hey, Michael! Thanks for reaching out. Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount #EH37FR will fit both diesel and non-diesel models, but it will not fit the Power Wagon models. There’s no…

view full answer...

Cover for 2003 Lance Camper 845

Product Page this Question was Asked From

Continue Researching