What is Length of Main Body of Dexter Surge Actuator part # T1607500
Updated 01/19/2026 | Published 08/05/2024 >
Question:
Need one more dimension the outer sleeve length. I see from the video that the overall length is 27.5inch and the width is 4inch but can I get the length of the outer sleeve the part that gets welded to the trailer? Thanks!
asked by: Steve D
0
Expert Reply:
Hey Steve, on the Dexter Actuator part # T1607500 the length of the main body of the coupler measures 16 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Weld-On
- 12500 lbs GTW
- 2-5/16 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Q&A: Does Titan Model 10 Actuator Replace Dico Model 10
- Shop: Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Drum
- Shop: Dexter Brake Actuator - Painted - Disc - 2-5/16" Ball - Weld On - 12,500 lbs
- Shop: Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 20,000 lbs
- Shop: Demco Surge Brake Actuator w Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 12.5K
- Shop: Demco Surge Brake Actuator w Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 16K
- Video: Dexter Brake Actuator Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: Demco Hydraulic Brake Line Kit for Single Axle Trailers: The Breakdown
- Q&A: Replacement Coupler For Boat Trailer With Surge Brakes Weld On and Bolt On Option
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Search Results: bearing 25580
- Search Results: brake line
- Search Results: brake hose
- Search Results: 2~5/16 hitch ball
- Search Results: t2374600
- Search Results: 2~5/16 ball
- Search Results: brake line hose
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: How to Determine The Weight Capacity of a 3 inch Diameter Axle
- Q&A: Is There a Installation Video That Will Help With Replacing Shocks On Dexter Model 10 Surge Actuator
- Q&A: Replacement for Gabriel Shock Model 610712
- Q&A: Where Do the Rubber Bearings Go On the Titan/Dico Model 10 Surge Brake Actuator
- Q&A: Replacement Front Roller Pin for 12.5K Dexter Brake Actuator w/ Drop



Jameson C.
1/19/2026
Hey Steve, did that 16-inch measurement for the main body of the Dexter actuator give you the detail you needed for your trailer weld? Knowing how it worked out could help others checking fit on the same setup.