Options For Straight Tongue Channel Coupler For 1-7/8" Hitch Ball
Updated 01/19/2026 | Published 08/01/2024
Products Featured in This Question
Question:
need a coupler for a trailer that has a four bolt attachment that bolts on the trailer and the bolt holes a 5 inches apart thanks the ball size is 17/8
asked by: Burris R
Expert Reply:
Hello Burris,
We have straight tongue channel couplers for a 1-7/8" hitch ball, though none with bolt holes that are 5" apart. Each of the couplers has holes 2-1/4" apart, so you can still use them if you're drill new holes. I know it's not what you asked for but I at least wanted to give you the option, and if you're okay with that, the right one will depend on the width of your trailer tongue.
- 2" Tongue: Channel Tongue Trailer Coupler # CT-2001-Z
- 2-1/2" Tongue: Channel Tongue Trailer Coupler # CT-2002-Z
- 3" Tongue: Channel Tongue Trailer Coupler # CT-2003-Z
Product Page this Question was Asked From
Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 1-7/8" Ball - Bolt On - 2,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 1-7/8 Inch Ball Coupler
- Bolt-On
- 2000 lbs GTW
- 2 Inch Channel
- Trigger Latch
- 2-Bolt
- Marine Grade
- etrailer
more information >
Continue Researching
- Q&A: Would 7-Way Trailer Wiring Circuit Have Amperage Rating for Powering 13 amp Horn
- Q&A: Bolt Hole Spacing Difference Between Fulton Couplers F233000301 and # F223000301
- Q&A: Can I Change My Trailer Coupler from a 1-7/8 Inch Coupler to a 2 Inch Coupler
- Article: Trailer Lighting Requirements
- Q&A: Brake Controller Install on 1997 Chevrolet Pickup
- Q&A: How Does the Handle Work on the Lippert Components Spare Tire Winch 159056
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: Replacement Bearing Kit for 3,500 lb Dexter Torsion Axle
- Article: Trailer Wiring Diagrams
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: What Do I Need To Tow A Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
Lazer S.
1/19/2026
Hey Burris, did one of those channel tongue couplers end up working for your trailer after drilling new holes? Knowing which one fit best could help others with the same bolt spacing. Your update could make it easier for the next person with a similar setup.