Is There RV Chair Rack that Can Attach to Ladder with 1.5 inch Diameter Tubing

Question

Question:

Does anyone make a chair rack for the 1.5 ladders?

asked by: Jim R

0

Expert Reply:

Hey Jim, we have the Camco RV chair rack part # CAM51490 which due to how it grabs the RV ladder can attach to one that has a 1.5 inch diameter tubing. This hooks over the actual rungs of the ladder and not around the vertical tubing is how it would work.

expert reply by: Jameson C

0

Jameson C.

2/3/2026

Hey Jim, how did the Camco chair rack work out with your 1.5-inch ladder? Knowing how it fit could help others looking for the same setup.

Answer 1

Thanks for the clarification, yes, the EZ Coupler 4-in-1 Threaded RV Sewer Adapter #F02-3112CL and Valterra Gray Water Drain Adapter #T1020-5VP will be compatible with each other and allow you easily, and cleanly, dump from your macerator to the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Hey Jeff, the Curt hitch part #C77MJ and the TowSmart part #TS42VR are both really great hitches. They are similar enough in design that I wouldn't say one or the other is more hidden. Now if you wanted something totally hidden we have the Oris…

view full answer...

Answer 10

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

view full answer...

Answer 11

Hey Chris, the Curt TriFlex brake controller part #C46SV does come with a custom fit install harness for an easy install in your 2003 Ford F-350. What are you planning on towing?

view full answer...

Answer 12

For your 2005 Ford E-350, whether it is a cutaway or the van I recommend the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65001. This confirmed fit front mounted hitch receiver is an easy installation that has a 9,000 lb line…

view full answer...

Is There RV Chair Rack that Can Attach to Ladder with 1.5 inch Diameter Tubing

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching