Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems
Updated 02/03/2026 | Published 07/14/2024
Products Featured in This Question
Question:
Hello! I read on your website where the L-pin for an Equalizer hitch will serve as a replacement L-Pin for Fastway e2 Weight Distribution Systems hitch. Is the opposite true, i.e., that the Fastway e-2 L-pin Part Number: FA92-03-9205 will work as a replacement for a 10K Equilizer hitch L-pin? My Equalizer pins are about 13 years old and need to be replaced. Thanks in advance for your time and attention.
asked by: Naomi C
Expert Reply:
No, it is not but we have the right ones you need. To replace your Equalizer pins you'll want to use the Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems item # EQ95-01-9430.
Product Page this Question was Asked From
Replacement L-Pin for Fastway e2 Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Pins and Clips
- e2
- Fastway
more information >
Continue Researching
- Shop: Replacement Spring Bar Retaining L-Pins for Blue Ox TrackPro and 2-Point Weight Distribution - Qty 2
- Shop: Replacement L-Pin for Fastway e2 Weight Distribution Systems
- Shop: Replacement L-Pin for Equal-i-zer 4,000-lb Weight Distribution Systems
- Shop: Replacement Hardware Kit for Fastway Sway Control Brackets
- Shop: Replacement Heavy-Duty L-Pin and Clip for Curt TruTrack Weight Distribution System w/ Sway Control
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW
- Shop: Replacement Hardware Kit for Fastway e2 Weight Distribution Head - Round and Trunnion Bar
- Q&A: What Are The Dimensions Of The Replacement L-Pin FA92-03-9205?
- Q&A: Can Door Be Replaced On Mighty Cord Replacement RV Power Inlet
- Q&A: Correct Replacement Frame Brackets for a 6K Equal-i-zer WDS
- Q&A: Replacement L-Pins for Fastway e2 Weight Distribution Systems
- Q&A: How to Measure to Find Weight Distribution Shank with the Right Amount of Drop to Tow Trailer Level
- Q&A: Shank For Fastway e2 Weight Distribution That Fits 2-1/2 Inch Hitch Receiver
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Q&A: Replacement L-Pin for Fastway e2 Weight Distribution System with 10,000 lb Trailer Capacity
- Article: Anti-Rattle Devices
- Article: Types of Trailer Hitches: How and Why to Use Each
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
Jerred H.
2/3/2026
Hey, how did the new Equal-i-zer L-pins work out as replacements for your old ones? Your update could make it easier for others needing to refresh their hitch setup too.