Measurements of Different Replacement Actuator Shocks for Trailer Brake Actuators

Updated 05/13/2014 | Published 05/12/2014

Products Featured in This Question

Replacement Shock Absorber for Toledo Brake Actuators

(26)

$216.02

Demco Replacement Shock Dampener for DA66 and DA66L Hydraulic Actuators

(8)

$47.62

Replacement Shock for Demco Hydraulic Trailer Brake Actuators - Models DA10, DA16, DA20, and DA91

(85)

$48.43

Replacement Shock for Dexter Model 6 and 10 Brake Actuators

(141)

$67.07

Replacement Shock Absorber for Dexter Model 60 Brake Actuators

(114)

$68.94

Question:

replacement actuator shocks

asked by: Mark R

Expert Reply:

It looks like you are looking for a replacement shock for your actuator. We have several models including # 1844-2. This particular model fits Toledo brand actuators. When fully closed it measures 6-1/4 inches from center of hole to center of hole and when expanded, it measures approximately 8-1/4 inches from center of hole to center of hole.

Replacement Shock for Titan Model 6 and 10 Brake Actuators # T1242600 measures 6 inches retracted and 8-1/16 inches extended. If you need a replacement for a Titan model 20 use # T0778400.

For a Titan model 60 you would need # T2336200 which is 5 inches when closed and 6-1/4 when open.

Demco shock # DS12426 is 6 inches when closed and 8-1/8 inches when open. And finally we have Demco shock # DM05692 which is 4-11/16 inches when closed and 6-1/8 inches when open.